Buffalo Technology WBR2-G54S user manual Admin Name Password

Page 59

Advanced Settings

•WAN side IP address auto acquisition - This is the method to acquire the IP address from the WAN (Internet) side DHCP server. Press Release to release current DHCP WAN information. Press Renew to obtain WAN information from the DHCP server. NOTE: If a manual IP is assigned to the WAN port, this feature is not displayed.

Name and

Password

Setup

Admin Name and

Password

AirStation name - When using multiple AirStations, select a unique name to make it easier to identify each AirStation through the AirStation Manager utility. This utility is seldomly used, thus, the AirStation name value has little value.

Administrator name - “root”, cannot be changed

Administrator password - Allows the administrator to enter an administrator password to restrict access to the setting screens.

59

Image 59

Contents WBR2-G54S Table of Contents Network Settings Table of Contents Introduction Introduction SOHO/SMB Networking Home NetworkingSystem Requirements AirStation WBR2-G54S Package ContentsProduct Views About the AirStation CD Installation / Setup Introduction Setup PreparationSetup Overview Antenna Installation Open the Setup Screen Standard SettingsAutomatic IP Assignment by ISP Enter ISP informationDSL Button PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information Wireless Function Enable or Advanced SettingsLAN Settings Wireless SettingsAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsWired WAN Performance Connection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings Routing Setup Network SettingsAdd Routing Table Entry IP Masquerade When Enable or Disable . AddressAddress Translation Display/Delete NAT Table Add NAT Table Advanced Settings Log Output Select Output to Packet FilterBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete DETECTOR@AIRSTATION Intrusion DetectorPage UPnP System Information ManagementAdmin Name Password NTP server name Enter Time setupSelect Use or Do not use Packet Trafﬁc Information Wired WAN Wired LAN Wireless LANIP Address and Medium Client MonitorPing Test Log information Displays Log InformationDisplay log info Select Log Information Select Syslog TransferLog Information Level Restored saved settings Save/Restore SettingsSave current settings Click AirStation Reboot/Reload DefaultsClick Restart to reboot Firmware ﬁle name Firmware UpdateCom/wireless Client Table Displays AossManually specify the encryp Aoss Function Click EnableAdditional Information Temperature & HumidityPower Characteristics SpeciﬁcationsHost Operating System Networking CharacteristicsRadio Characteristics Regulatory InformationOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Diag LED Activity TroubleshootingCommon Problems LED Activity BLEDs Work But Client PC Cannot Connect to Network Changing Client TCP/IP Settings in WindowsTable B.1.1 Diag LED Activity Table Other Problems Restrictions ProblemCause Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NotePotential restrictive use FCC RF Radiation Exposure StatementEU Countries intended for use EU Countries Not intended for useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax