Buffalo Technology WBR2-G54S user manual Glossary

Page 85

Glossary

Driver: Software that interfaces a computer with a specifi c hardware device.

DSSS (Direct Sequence Spread Spectrum): Method of spreading a wireless signal into wide frequency bandwidth.

DTE (Data Terminal Equipment): Device that

con10BaseT or 100BaseTx: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps.

Dynamic IP Address: An IP address that is automatically assigned to a client station in a TCP/IP network, typically by a DHCP server.

ESS (Extended Service Set): A set of two or more BSSs that form a single sub-network. SSID is user identifi cation used in the ESS LAN confi guration.

Ethernet: The most widely used architecture for Local Area Networks (LANs). It is a shared- media network architecture. The IEEE 802.3 standard details its functionality.

Ethernet cable: A wire similar to telephone cable that carries signals between Ethernet devices.

File and Print Sharing: A Microsoft application that allows computers on a network to share

fi les and printers.

Firmware: Programming inserted into pro- grammable read-only memory, thus becoming a permanent part of a computing device.

Frame: A fi xed block of data, transmitted as a single entity. Also referred to as packet.

Full-Duplex:To transmit on the same channel in both directions simultaneously.

Half-duplex:To transmit on the same channel in both directions, one direction at a time.

Hub: A device which allows connection of com- puters and other devices to form a LAN.

IEEE (Institute of Electrical and Electronics Engineers): The professional organization which promotes development of electronics technology.

85

Image 85
Contents WBR2-G54S Table of Contents Network Settings Table of Contents Introduction Introduction SOHO/SMB Networking Home NetworkingSystem Requirements AirStation WBR2-G54S Package ContentsProduct Views About the AirStation CD Installation / Setup Setup Overview Setup PreparationIntroduction Antenna Installation Open the Setup Screen Standard SettingsDSL Button Enter ISP informationAutomatic IP Assignment by ISP PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information LAN Settings Advanced SettingsWireless Settings Wireless Function Enable orAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings Wired WAN Performance WAN SettingsWAN Port Connection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings Routing Setup Network SettingsAdd Routing Table Entry Address Translation Enable or Disable . AddressIP Masquerade When Display/Delete NAT Table Add NAT Table Advanced Settings Log Output Select Output to Packet FilterBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete DETECTOR@AIRSTATION Intrusion DetectorPage UPnP System Information ManagementAdmin Name Password Select Use or Do not use Time setupNTP server name Enter Packet Traffic Information Wired WAN Wired LAN Wireless LANIP Address and Medium Client MonitorPing Test Display log info Select Log InformationLog information Displays Log Information Level Syslog TransferLog Information Select Save current settings Click Save/Restore SettingsRestored saved settings Click Restart to reboot Reboot/Reload DefaultsAirStation Com/wireless Firmware UpdateFirmware file name Client Table Displays AossManually specify the encryp Aoss Function Click EnablePower Characteristics Temperature & HumiditySpecifications Additional InformationRadio Characteristics Networking CharacteristicsRegulatory Information Host Operating SystemOpen Office Environment Semi-Open Office Environment 2412 Common Problems TroubleshootingLED Activity B Diag LED ActivityTable B.1.1 Diag LED Activity Table Changing Client TCP/IP Settings in WindowsLEDs Work But Client PC Cannot Connect to Network Other Problems Cause ProblemRestrictions Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NoteEU Countries intended for use FCC RF Radiation Exposure StatementEU Countries Not intended for use Potential restrictive useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax