AVE VSI-PRO Capture to Port Capture to Memory Dump Memory Exit, RX Baudrate Auto TX Baudrate

PROGRAMMING

DATA CAPTURE

This feature allow user to store the data either internal memory of VSI-Pro or some external data storing device. Press the “Up” or “Down” button to move the cursor to “DATA CAPTURE” and press “Set”. The following sub-menu will appear:

CAPTURE TO PORT 1

CAPTURE TO MEMORY

DUMP MEMORY

EXIT

Figure 75: DATA CAPTURE Sub-Menu

Press “Set” to return to the previous menu.

CAPTURE TO PORT 1

This feature redirect the incoming data to VSI-Pro to its output ( Pin 3 of AT type RS-232 female connector ) where that data can be stored to data storing devices (e.g. PC). This feature is useful to store non-RS 232 format data. Press the “Up” or “Down” button to move the cursor to “CAPTURE TO PORT 1 and press “Set”. The following display will appear (example only):

RX BAUDRATE :	AUTO
TX BAUDRATE :	2400
PARITY :	NONE
DATA BIT :			8
HANDSHAKING :		OFF

BAUDRATE DETECTION..

Figure 76: CAPTURE TO PORT 1 Display

Press “Set” to return to the previous menu.

CAPTURE TO MEMORY

This feature allow you to store the data in the internal memory of VSI-Pro. You can store up to 20 kilobytes of data in the internal memory of VSI-Pro. Power up the VSI-Pro for 24 hours prior to download of data. This will provide VSI- Pro’s internal battery a full charge to hold data in its memory. Press the “Up” or “Down” button to move the cursor to “CAPTURE TO MEMORY” and press “Set”. The following display will appear (example only):

RX BAUDRATE :

TX BAUDRATE :

PARITY :

DATA BIT :

HANDSHAKING :

BAUDRATE DETECTION..

AUTO 2400 NONE

8

OFF

Figure 77: CAPTURE TO MEMORY Display

Press “Set” to return to the previous menu.

NOTE ?

VSI-Pro can only hold up to 20 kilobytes of data to make sure that you only transfer the data which is in correct format.

VSI-Pro VIDEO SERIAL INTERFACE

45