PROGRAMMING
EXCEPTION REPORT MENU CONTINUED
OUTPUT
Choices: ON, OFF
This is global output to send data to the serial printer. When “ON” is selected all the data will be send to the serial printer regardless of what setting of out put has selected in the individual output in set exception menu. When “OFF” is selected only those exception will send to the serial printer whose out put is “ON” under set exceptions menu for individual exceptions. To turn output “ON” or “OFF”, press the “Up” or “Down” button to move the cursor to “OUTPUT” and press “Set”. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is displayed.
TIME STAMP
Choices: ON, OFF
If TIME STAMP is selected “ON” then printer will print the exception with time stamp flag, otherwise just print the Exception. To turn TIME STAMP “ON” or “OFF”, press the “Up” or “Down” button to move the cursor to “TIME STAMP” and press “Set”. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is displayed.
EXIT
Press the “Up” or “Down” button to move the cursor to “Set” to return to the previous menu.
5.8ALARM OUTPUTS
To access alarm output, press the “Up” or “Down” button to move the cursor to “ALARM OUTPUTS” and press “Set”. The following
ALARM NO. | 1 |
ALARM TRIGGER | 1 |
NORMALSTATE | NO |
ALARM DURATION | 20 |
FLAG TYPE | FLASH * |
FLAG DURATION | 000 |
TRIGGERED TEXT |
|
EXIT |
|
Figure 66: ALARM OUTPUTS Sub-Menu
The ALARM OUTPUTS menu controls not only the formatting of the external alarms but also the formatting of the
ALARM NO.
Choices: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
The
39