AVE VSI-PRO operation manual TEST/DEMO Mode, SET Triggered Text

PROGRAMMING

OUTPUT TEXT

Choices: ON, OFF

Press the “Up” or “Down” button to move the cursor to “OUTPUT TEXT” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is displayed. Selecting “OFF” will not send any exception text to the serial printer.

SET TRIGGERED TEXT

Press the “Up” or “Down” button to move the cursor to “SET TRIGGERED TEXT” and press “Set”. The following sub- menu will appear:

DISPLAY TEXT	OFF
OUTPUT TEXT	OFF
SET TRIGGERED TEXT
EXIT

Figure 68: Triggered Text Main-Menu

You can enter 2 lines with 40 alpha numeric text on each line. You can also enter non-printable data (control code) instead of triggered text. Each control code occupies 3 charactors, therefore you can enter 13 control codes in a line. To enter control code, first print up arrow ^ follwed by 2 hex digit. For example, hex code 01 has to be entered like ^ 01.

Press “Up” and “Down” simultaneously to exit..

EXIT

Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.

5.9 TEST/DEMO MODE

The TEST/DEMO MODE provides you with several ways to test the VSI-Pro and demonstrate its capabilities as a cash register interface. Press the “Up” or “Down” button to move the cursor to “TEST/DEMO MODE” and press “Set”. The following sub-menu will appear:

PORT 1 TEST

DATA CAPTURE

REGISTER DEMO

VERSION ID

EXIT

Figure 69: TEST/DEMO MODE Sub-Menu

VSI-Pro VIDEO SERIAL INTERFACE

42