AVE VSI-PRO operation manual RX / TX Test, RX /TX Test Display

PROGRAMMING

NOTE ?

In any of the above tests, you can stop the scrolling data by holding down either “Up” or “Down” button.

RX / TX TEST

In the RX/ TX test the VSI-Pro echos whatever it receives. Press the “Up” or “Down” button to move the cursor to “RX/ TX TEST” and press “Set”. The following display will appear (example only):

RX BAUDRATE :

TX BAUDRATE :

PARITY :

DATA BIT :

HANDSHAKING : ECHOING :

BAUDRATE DETECTION..

AUTO 2400 NONE

8

OFF

Figure 73: RX /TX TEST Display

Press “Set” to return to the previous menu.

BAUD RATE SCAN

The Baud Rate Scan test can scan the baud rate of your register. Press the “Up” or “Down” button to move the cursor to “BAUD RATE SCAN” and press “Set”. The following display will appear (example only):

RX BAUDRATE :

TX BAUDRATE :

PARITY :

DATA BIT :

HANDSHAKING :

BAUDRATE SCAN : BAUDRATE DETECTION..

AUTO 2400 NONE

8

OFF

Figure 74: Baudrate Scan Display

Enter a transaction from the register. The VSI-Pro will detect the baud rate and display it in front of RX Baud rate.

Press “Set” to return to the previous menu.

EXIT

Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.

VSI-Pro VIDEO SERIAL INTERFACE

44