Atlantis Land A02-RAV211 manual System

Page 46

VoIP ROUTER ADSL

RedialTimer: indicate the time period through which the dial tone is heard once the phone is lifted off the hook. At the end of this period, if no digits have been pressed, VoIP device will start playing fast-busy tone.

AlertTimer: indicate the time for which VoIP device will play the ring when an incoming call has arrived and phone is on-hook. After this time period, the VoIP device will stop the ring automatically and reject the incoming call.

DisconnectTimer: indicate the time for which the fast-busy tone is played once a call has been disconnected by remote end. At the end of this time, the Warble tone will be played until the user hangs up the phone.

RingBackTimer: Indicate the time period for which the VoIP device will wait while the ring back tone is been played for the final response from the other end point once an outgoing call has been made and the initial response has been received.

CallProgressTimer: indicate the time period for which VoIP device will wait for initial response from the other end point once an outgoing call has been made.

CallWaitingTimer: indicate the time period for which the call-waiting tone will be played when an incoming call arrives in the connected state.

CallFwdNoAnsTimer: indicate the time period for which the call will be forwarded when no answered by anyone. This timer is applicable when “call forward on no answer” is enabled.

3.6.3.4 System

There are five items under the System section: Password, Time Zone, Upgrade, Factory Setting and Restart.

40

Image 46
Contents VoIP Router Adsl Page Important Note CopyrightCE Mark Warning FCC WarningTable of Contents Chapter Chapter Page Introduction An Overview of the VoIP Router AdslPackage Contents VoIP Router Adsl FeaturesPage VoIP Router Adsl Application Front LEDs Rear PortsCabling Before Configuration Connecting the VoIP Router AdslConfiguring PC in Windows For Windows 95/98/MEVoIP Router Adsl For Windows NT4.0 For Windows Click OK to finish the configuration For Windows XP VoIP Router Adsl Factory Default Settings Username and PasswordConfiguring with the Web Browser Information from the ISPStatus Quick StartStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP StatusStatus- PPP Status Status- Learned MAC TableRouting Table System LogQuick Start Security LogsAdsl Quick Start VoIP Quick Start ConfigurationVoIP System Firewall Virtual Server Advanced 3.1 WAN VoIP Router Adsl Static IP Settings Service Category Select UBR or CBR Dhcp ClientMAC Spoofing 3.2 LAN Device IP Address Dhcp ServerVoIP VoIP Router Adsl AuthorizationUserID Same as UserID Phone Book CallWaiting Enable/Disable the call waiting feature Call FeatureCallForwarding Advanced Telephony Settings CallReturn Enable/Disable the call return featureConfigure Caller ID info Echo Cancellation Tail Length Setting the Tail Length Ring & Tone Configuration Timeouts System Password Time ZoneFactory Setting UpgradeRestart Firewall Packet FilteringVoIP Router Adsl Bridge Filtering Intrusion DetectionBlock WAN Request Virtual Server AdvancedAdsl 3.7.2 DNSDynamic DNS 3.7.4 NAT VoIP Router Adsl RIP Default is Disabled Border Gateway Default is Enabled 3.7.5 RIPStatic Route Misc Configuration Dhcp Relay Default at Dhcp Server Dhcp Target IP Default isTesting Ethernet LAN connection Diagnostic TestIgmp Proxy Default at Disabled Testing Adsl SynchronizationTest Ethernet connect to ATM Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test IP connect to PPPSave Config Test Internet connectionProblems with the LAN Interface Problems with the WAN InterfaceProblem Corrective Action Technical Features Appendix B Support