Atlantis Land A02-RAV211 manual Password, Time Zone

Page 47

VoIP ROUTER ADSL

3.6.3.4.1 Password

In factory setting, the default password is atlantis, and that for user is also password. You can change the default password to ensure that someone cannot adjust your settings without your permission. Every time you change your password, please record the password and keep it at a safe place.

Please note that the minimum input for password is 8 alphanumeric characters long. Since it is case sensitive, be sure that you remember whether a letter is in upper or lower case and make sure that your Caps Lock is off. Moreover, please do not use the sign “&” in the passwords.

3.6.3.4.2 Time Zone

A02-RAV211 does not have a real time clock on board; instead, it uses the simple network time protocol (SNTP) to get the current time from the SNTP server in outside network. Please choose your local time zone and click Submit. You will get the correct time information after you really establish a connection to Internet. The current time of selected time zone will be shown in the Status

– System window.

Automatically adjust clock for daylight saving changes: It is optional for different time zone area.

SNTP Server IP Address: Specify the IP address if you want to use your familiar SNTP server.

41

Image 47
Contents VoIP Router Adsl Page FCC Warning CopyrightCE Mark Warning Important NoteTable of Contents Chapter Chapter Page An Overview of the VoIP Router Adsl IntroductionVoIP Router Adsl Features Package ContentsPage VoIP Router Adsl Application Rear Ports Front LEDsCabling Connecting the VoIP Router Adsl Before ConfigurationFor Windows 95/98/ME Configuring PC in WindowsVoIP Router Adsl For Windows NT4.0 For Windows Click OK to finish the configuration For Windows XP VoIP Router Adsl Username and Password Factory Default SettingsInformation from the ISP Configuring with the Web BrowserQuick Start StatusStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status LAN Status TCP Status Status LAN StatusStatus- Learned MAC Table Status- PPP StatusSystem Log Routing TableAdsl Quick Start Security LogsQuick Start VoIP System Firewall Virtual Server Advanced ConfigurationVoIP Quick Start 3.1 WAN VoIP Router Adsl MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings 3.2 LAN Dhcp Server Device IP AddressVoIP VoIP Router Adsl AuthorizationUserID Same as UserID Phone Book CallForwarding Call FeatureCallWaiting Enable/Disable the call waiting feature CallReturn Enable/Disable the call return feature Advanced Telephony SettingsConfigure Caller ID info Echo Cancellation Tail Length Setting the Tail Length Ring & Tone Configuration Timeouts System Time Zone PasswordRestart UpgradeFactory Setting Packet Filtering FirewallVoIP Router Adsl Intrusion Detection Bridge FilteringBlock WAN Request Advanced Virtual Server3.7.2 DNS AdslDynamic DNS 3.7.4 NAT VoIP Router Adsl 3.7.5 RIP RIP Default is Disabled Border Gateway Default is EnabledStatic Route Dhcp Relay Default at Dhcp Server Dhcp Target IP Default is Misc ConfigurationTesting Adsl Synchronization Diagnostic TestIgmp Proxy Default at Disabled Testing Ethernet LAN connectionTest IP connect to PPP Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test Ethernet connect to ATMTest Internet connection Save ConfigProblem Corrective Action Problems with the WAN InterfaceProblems with the LAN Interface Technical Features Support Appendix B