Atlantis Land A02-RAV211 manual Bridge Filtering, Intrusion Detection

Page 51

VoIP ROUTER ADSL

If the DHCP server option is enabled, you have to be very careful in assigning the IP addresses of filtered private IP range in order to avoid conflicts because you do not know which PC in LAN is assigned to which IP address. The easiest and safest way is that the filtered IP address is assigned to specific PC that is not allowed to access outside resource such as Internet. You configure the filtered IP address manually to this PC, but it is still in the same subnet with the router.

3.6.3.5.2 Bridge Filtering

Enable Bridge Filtering: Check Yes to enable this function or check No to disable.

Src MAC: Enter the source MAC address.

Dest MAC: Enter the destination MAC address.

Type: Enter the Ethernet type.

Block Forward: Check Block if you want to block requests from the source MAC address sending to the destination MAC address. Check Forward if you want to forward requests from the source MAC address sending to the destination MAC address.

3.6.3.5.3 Intrusion Detection

Check “Enable” if you want to detect invader sneak in your computer without permitted .The ADSL Router can automatically detect and block the DoS (Denial of Service) attack if user enables this function. This kind of attack is not to achieve the confidential data of this network; instead, it aims to crush specific equipment or the entire network. If this happens, the users will not be able to

45

Image 51
Contents VoIP Router Adsl Page FCC Warning CopyrightCE Mark Warning Important NoteTable of Contents Chapter Chapter Page An Overview of the VoIP Router Adsl IntroductionVoIP Router Adsl Features Package ContentsPage VoIP Router Adsl Application Rear Ports Front LEDsCabling Connecting the VoIP Router Adsl Before ConfigurationFor Windows 95/98/ME Configuring PC in WindowsVoIP Router Adsl For Windows NT4.0 For Windows Click OK to finish the configuration For Windows XP VoIP Router Adsl Username and Password Factory Default SettingsInformation from the ISP Configuring with the Web BrowserQuick Start StatusStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status LAN Status TCP Status Status LAN StatusStatus- Learned MAC Table Status- PPP StatusSystem Log Routing TableSecurity Logs Quick StartAdsl Quick Start Configuration VoIP Quick StartVoIP System Firewall Virtual Server Advanced 3.1 WAN VoIP Router Adsl Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing 3.2 LAN Dhcp Server Device IP AddressVoIP VoIP Router Adsl AuthorizationUserID Same as UserID Phone Book Call Feature CallWaiting Enable/Disable the call waiting featureCallForwarding CallReturn Enable/Disable the call return feature Advanced Telephony SettingsConfigure Caller ID info Echo Cancellation Tail Length Setting the Tail Length Ring & Tone Configuration Timeouts System Time Zone PasswordUpgrade Factory SettingRestart Packet Filtering FirewallVoIP Router Adsl Intrusion Detection Bridge FilteringBlock WAN Request Advanced Virtual Server3.7.2 DNS AdslDynamic DNS 3.7.4 NAT VoIP Router Adsl 3.7.5 RIP RIP Default is Disabled Border Gateway Default is EnabledStatic Route Dhcp Relay Default at Dhcp Server Dhcp Target IP Default is Misc ConfigurationTesting Adsl Synchronization Diagnostic TestIgmp Proxy Default at Disabled Testing Ethernet LAN connectionTest IP connect to PPP Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test Ethernet connect to ATMTest Internet connection Save ConfigProblems with the WAN Interface Problems with the LAN InterfaceProblem Corrective Action Technical Features Support Appendix B