Atlantis Land A02-RAV211 manual Information from the ISP, Configuring with the Web Browser

Page 22

			VoIP ROUTER ADSL

LAN Port		WAN Port

IP address	192.168.1.254	N/A
IP address

Subnet Mask	255.255.255.0
Subnet Mask

DHCP server function	Enabled
DHCP server function

3.5 Information from the ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE	VPI/VCI, VC-based/LLC-based multiplexing, Username,
	Password, Service Name, and Domain Name System (DNS) IP
	address (it can be automatically assigned from ISP or be set
	fixed).
PPPoA	VPI/VCI, VC-based/LLC-based multiplexing, Username,
	VPI/VCI, VC-based/LLC-based multiplexing, Username,
	Password, and Domain Name System (DNS) IP address (it
	can be automatically assigned from ISP or be set fixed).

RFC1483 Bridged	VPI/VCI, VC-based/LLC-based multiplexing and configure
	this product into BRIDGE Mode.
RFC1483 Routed	VPI/VCI, VC-based/LLC-based multiplexing, IP address,
	Subnet mask, Gateway address, and Domain Name System
	(DNS) IP address (it is fixed IP address).
IPoA	VPI/VCI, IP address, Subnet mask, Gateway address, and
	Domain Name System (DNS) IP address (it is fixed IP
	address).

3.6 Configuring with the Web Browser

Open the web browser, enter the local port IP address of this ADSL VoIP Router, which defaults at http://192.168.1.254, and click “Go”, a username and password window will appear. The default username & password are admin & atlantis, in respectively

16

Image 22

Contents VoIP Router Adsl Page Important Note CopyrightCE Mark Warning FCC WarningTable of Contents Chapter Chapter Page Introduction An Overview of the VoIP Router AdslPackage Contents VoIP Router Adsl FeaturesPage VoIP Router Adsl Application Front LEDs Rear PortsCabling Before Configuration Connecting the VoIP Router AdslConfiguring PC in Windows For Windows 95/98/MEVoIP Router Adsl For Windows NT4.0 For Windows Click OK to finish the configuration For Windows XP VoIP Router Adsl Factory Default Settings Username and PasswordConfiguring with the Web Browser Information from the ISPStatus Quick StartStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP StatusStatus- PPP Status Status- Learned MAC TableRouting Table System LogQuick Start Security LogsAdsl Quick Start VoIP Quick Start ConfigurationVoIP System Firewall Virtual Server Advanced 3.1 WAN VoIP Router Adsl Static IP Settings Service Category Select UBR or CBR Dhcp ClientMAC Spoofing 3.2 LAN Device IP Address Dhcp ServerVoIP VoIP Router Adsl AuthorizationUserID Same as UserID Phone Book CallWaiting Enable/Disable the call waiting feature Call FeatureCallForwarding Advanced Telephony Settings CallReturn Enable/Disable the call return featureConfigure Caller ID info Echo Cancellation Tail Length Setting the Tail Length Ring & Tone Configuration Timeouts System Password Time ZoneFactory Setting UpgradeRestart Firewall Packet FilteringVoIP Router Adsl Bridge Filtering Intrusion DetectionBlock WAN Request Virtual Server AdvancedAdsl 3.7.2 DNSDynamic DNS 3.7.4 NAT VoIP Router Adsl RIP Default is Disabled Border Gateway Default is Enabled 3.7.5 RIPStatic Route Misc Configuration Dhcp Relay Default at Dhcp Server Dhcp Target IP Default isTesting Ethernet LAN connection Diagnostic TestIgmp Proxy Default at Disabled Testing Adsl SynchronizationTest Ethernet connect to ATM Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test IP connect to PPPSave Config Test Internet connectionProblems with the LAN Interface Problems with the WAN InterfaceProblem Corrective Action Technical Features Appendix B Support