Asante Technologies 35160 Configuration, Logging, Accessing a Submenu, Exiting a Submenu

Page 20

Chapter 3. Configuration

This chapter describes the log in procedure and configuration of the switch via the console or telnet interfaces. For information on configuring the switch via the web browser, see Chapter 5 Web-Based Management.

Note: The screens shown are from the IC35160-T. The IC35160-G may have slightly different screens, but this will not affect the configuration instructions. The web browser user interface (Chapter 5) may also vary, but should not affect the configuration instructions.

Logging In

After connecting to the IC35160, you will immediately need to log in. For the initial SSH login, the username and password are fixed as root and Asante, respectively. After that, any user can authenticate using SSH (up to 4 user sessions at a time), and there will be no SSH login prompt.

For logging into the switch via Telnet or web, the default user names are root, readwrite, and readonly, and the default password is Asante.

Important! The default password is Asante. The password is case-sensitive; enter it exactly as shown.

After successfully logging in, the Main Menu screen is displayed. Type the corresponding command letter to access sub-menus within a menu.

==============================================================

IntraCore 35160-T Remote Management System Version 2.0 Compiled Date: Jun 17 2003 20:41:25

Asante Technologies, Inc.

Copyright (c) 2003 Asante Technologies, Inc.

==============================================================

Main Menu
<Cmd>	<Description>
g	General Information
c	Configuration
s	Statistics

qClose Connection

root>

From the Main Menu, the user can access three submenus:

•General Information

•Configuration

•Statistics

If using Telnet, a fourth option for closing the connection is available as well.

Accessing a Submenu

To access a submenu, type the command letter that corresponds with the option needed. For example, type g for General Information.

Exiting a Submenu

To exit a submenu, type q.

To exit a command line without changing the configuration setting (for example, the “Change Password” option in the User Interface Configuration Menu), press ctrl-c.

20

Image 20

Contents IntraCore 35160 Series Quick Start Guide Layer 2 Gigabit Switches User’s Manual IntraCore 35160 SeriesTable of Contents Page Features IntroductionLEDs SwitchCore CXE2010Package Contents 1 IC35160-T 2 IC35160-GManagement and Configuration Front and Back Panel DescriptionsSnmp Management Console InterfaceWeb-Based Interface Hardware Installation and Setup Installation OverviewSafety Overview Recommended Installation ToolsInstallation into an Equipment Rack Power RequirementsEnvironmental Requirements Cooling and AirflowInstalling a Gbic Gbic InterfacesInstalling the Optional Emergency Power Supply Connecting PowerRemoving a Gbic Gbic Care and HandlingConnecting to the Network 1 10/100/1000BaseT Ports Cabling ProceduresConnecting to a Console SetupGigabit Ethernet Ports Cabling Procedures Connecting Via the Web Browser Connecting Via TelnetChanging the Password IP AssignmentSimple Network Management Protocol Snmp Configuration Accessing a SubmenuLogging Exiting a SubmenuConfiguration Menu General InformationAdministration Configuration Changing System Administration InfoChanging System IP Information System IP ConfigurationPort Configuration Page Advanced Port Configuration Enabling or Disabling a PortSetting Port Class of Service Setting Port Default PrioritySetting Port Maximum Packet Length Enabling or Disabling 802.3x Flow ControlUnicast Forwarding Database Configuration Global Port ConfigurationDisplaying the Forwarding Database Setting the MAC Address Age-Out Time Security ManagementVlan Management Searching for a MAC AddressChanging Community Strings Protocol ConfigurationSnmp Configuration Enabling Authentication Traps Adding or Updating a Trap ReceiverSpanning Tree Protocol STP Configuration Deleting a Trap ReceiverEnabling and Disabling STP Spanning Tree Port ConfigurationSetting Port Priority and Path Cost Trunk Group Configuration Assigning Packets to Priority Queues QoS Priority Queue ManagementDefining the Priority List Example Setting SSH/Telnet UI Time-out User Interface ConfigurationSetting Console UI Time-out Period Enabling or Disabling SSH and Telnet Change PasswordAdding or Deleting an Access Host Enabling or Disabling the Web Server Access ControlSystem Utilities Adding or Deleting a Monitor Port Port MirroringEnabling or Disabling System Port Mirroring System Clock System ResetResetting the Switch Scheduling a System Reset System LogBootstrap Configuration Clearing the System LogTftp File Transfers Statistics Ping UtilityRmon Management Advanced ManagementSnmp and Rmon Management Duplicated IP Detection and Trap Enabling and Disabling Duplicated IP DetectionEnabling and Disabling Duplicated IP Trap Viewing a List of Duplicated IP AddressesConfiguring Port Security Enabling and Disabling Station Movement TrapConfiguring Port New Node Detection Trap Configuring Port Lock and Intruder LockPort-based Network Access Control Configuring Security Level 2 or LevelSetting the Intruder Trap Resetting Security to DefaultsPage Port Control Settings Name DescriptionSetting Timers Server Port Setting Radius ParametersRadius Server IP Vlan Management Vlan Specifications for the IntraCore 35160 SeriesOther Vlan Features of the switch Configuring Static Vlan Groups Creating a VlanAdvanced Static Vlan Configuration Configuring Vlan Port Attributes Setting the Port Vlan IDConfiguring Port Receive Frame Type Adding and Deleting VLANs from the PortSetting Port Type Displaying a Summary of Vlan GroupsResetting Vlan Configuration to Defaults IP Multicast Traffic ManagementDisplaying a Vlan Port Summary Multicast AddressesEnabling and Disabling Igmp Snooping Configuring IP Multicast Traffic ManagementIgmp Snooping Advanced Igmp Configuration Displaying a Summary of Group AddressesIP Multicast Forwarding Database Configuration Adding Ports to the Selected AddressInserting a Multicast Group Address Removing a Multicast Group AddressAccessing with a Web Browser Web-Based ManagementManagement Buttons Front Panel ButtonGenl Info General Information Button Port Config Port Configuration Button Span Tree Spanning Tree Button Snmp Button Addr Address Table ButtonVlan Group Create Vlan ConfigurationVlan Button Port Configuration Set Port TypePort Vlan ID Pvid Acceptable Frame TypeTrunking Button Security ButtonPort Ingress Filtering Tag/Untag Port Egress TypePage Snmp Protocol Snmp ManagementSnmp Management Operations Name Space Path Community Name and SecurityMIB Tree MIB Groups Supported Switching Concepts VLANsPort-Based VLANs Vlan ID and Tagged FramesSpanning Tree Protocol Port Vlan IDHow It Works Spanning Tree ParametersFull Duplex Spanning Tree Port ConfigurationFull Duplex, Flow Control, and Auto-negotiation Flow Control Auto-NegotiationAppendix A. Troubleshooting Problem Possible SolutionsPhysical Characteristics Appendix B. Features and SpecificationsSpecifications Standards Compliance Technical Support and WarrantyEnvironmental Range IntraCare Warranty Statement Appendix C. FCC Compliance and Warranty StatementsFCC Compliance Statement Important Safety Instructions Page Pin Number Signal Name Appendix D. Console Port Pin OutsAppendix E. Online Warranty Registration Appendix F. BootP Configuration Bootstrap ConfigurationImage Banks Loading Software LocallyBOOTP-TFTP Loading Software Remotely