Asante Technologies 35160 Enabling and Disabling Station Movement Trap, Configuring Port Security

1.From the Configuration Menu, type t to access the Security Management Menu.

2.Type l to display the duplicated IP list. A screen appears, similar to the following screen.

+	---------------IP Address	+	-----------------Owner MAC	--+	+	-----------------Spoofer MAC	--+	+
				P			P
+	xxx.xxx.xxx.xxx---------------	+	-----------------	+--	+	-----------------	+--	+
			00:00:94:CC:C5:36		1	00:00:94:CC:C7:37 17
	xxx.xxx.xxx.xxx		00:00:94:CC:C5:36		1	00:00:94:CC:C7:37 17
	xxx.xxx.xxx.xxx		00:00:94:CC:C5:36		1	00:00:94:CC:C7:37 17
End of Summary,			Quit

4.2.2 Enabling and Disabling Station Movement Trap

The station movement trap security measure ensures that when any end station is moved from one switch port to another, an alert is sent to the designated trap receiver. Station movement is detected when a station’s MAC address (already learned by the switch) appears on a different switch port. The station movement trap includes the station’s MAC address and IP address (if available) and the switch’s port numbers.

By default, station movement trap is disabled.

To enable or disable detection of the movement of a station on the switch:

1.From the Configuration Menu, type t to access the Security Management Menu.

2.Type s to toggle the station movement trap.

4.2.3Configuring Port Security

To access the Port Security Configuration Menu, type t in the Configuration Menu to access the Security Management Menu, then type p to access the Port Security Configuration Menu. A screen similar to the following will appear:

IntraCore 35160-T Port Security Configuration Menu

Port: 01 Port Name: <none>

Port Security Info:

[+: Port Security Enabled, -: No Port Security, !: Port Disabled By Security]

Port Security Status:		[01]-------- [09]--------
Port Security Type:		<none>	[Disabled]
Port New Node Detect		Trap Status:
Port Intruder Detect		Trap Status:	[Enabled]
Port Trusted MAC Address: [<none>]
<Cmd>	<Description>
o	Set/Clear Port Security

tToggle Port Security Trap Enable/Disable

i Insert/Modify Port Trusted MAC Address

d Display Port Intruder Nodes

h Port Security Help

q Return to previous menu

root>

S)elect port N)ext port P)rev port

48