
To access the Configuration Menu when you are logged in as root or readwrite, type c from the Main Menu. The Configuration Menu appears, as shown below (from a telnet session):
IntraCore | Power Unit Status = OK | |
<Cmd> | <Description> |
|
a | Administration Configuration |
|
i | IP Configuration |
|
p | Port Configuration |
|
d | Forwarding Database Configuration |
|
t | Security Management |
|
v | VLAN Management |
|
r | Protocol Configuration |
|
g | Trunk Group Configuration |
|
o | QoS Management |
|
u | User Interface Configuration |
|
s | System Utilities |
|
q | Return to previous menu |
|
root> |
|
|
Accessing a Submenu
To access a submenu, type the command letter that corresponds with the configuration option needed. For example, type a to access the Administration Configuration Menu.
Most of the configuration options are described in detail in the rest of this chapter. The more advanced configuration options are discussed in Chapter 4 Advanced Management.
3.3 Administration Configuration
The System Administration Configuration Menu displays, and allows the user to change the name of the switch, its location, and the contact information.
IntraCore
Description: Asante Technologies, Inc. IntraCore
Object ID: 1.3.6.1.4.1.298.2.2.30
Name: <none>
Location: <none>
Contact: <none>
<Cmd> | <Description> | ||
n | Set | System | Name |
l | Set | System | Location |
cSet System Contact Information
q Return to previous menu
root>
Changing System Administration Info
To change the name, location, or contact information for the switch, use the following procedure:
1.Open the Administration Configuration Menu by typing a in the Configuration Menu.
2.Type the command letter (n, l, or c) of the item to be changed in the System Administration Configuration Menu.
3.At the prompt, type the new information.
Note: Each parameter is limited to 64 characters, including spaces.
To cancel a selected option, press
22