Asante Technologies 35160 user manual Advanced Static Vlan Configuration

Page 57

Removing a VLAN

To remove the VLAN, from the VLAN Group Static Configuration Menu, type r.

Enabling and Disabling Management Access

The IntraCore 35160 supports configurable management access for VLANs. By default, management access is enabled, and all devices connected to the switch in a VLAN can communicate with the switch management agent.

Important! Management access for a VLAN can be disabled. If security is a concern for members of a particular VLAN, disabling management access for that VLAN will prevent any member of that VLAN from attempting to change the switch’s configuration.

To enable or disable management access for this VLAN, from the VLAN Group Static Configuration Menu, type s to select the VLAN, then type t to toggle management access.

Important! DO NOT disable Management Access if you are using only the default VLAN.

Adding/Moving Port Members

To add ports as members of the VLAN, from the VLAN Group Static Configuration Menu, type m. Follow the instructions on the screen to enter the port number to assign to the VLAN. Adding a port to a VLAN does not affect the port’s status on any other VLAN.

Deleting Port Members

To delete ports as members of the VLAN, from the VLAN Group Static Configuration Menu, type d. Follow the instructions on the screen to enter the port number to delete from the VLAN. Deleting a port from a VLAN does not affect the port’s status on any other VLAN.

4.3.3 Advanced Static VLAN Configuration

To specify Tagging or No Tagging for a Port, type l from the VLAN Group Static Configuration Menu. This accesses the VLAN Port Configuration Menu. Next, type e to select Advanced Configuration Menu, as shown on the following screen:

IntraCore

35160-T VLAN Advanced Port Configuration Menu Port:[01]

Port VLAN ID (PVID):

0001

Acceptable Frame Type: All Frames

Port Ingress Filtering: Disabled

Port Type: Normal

 

VLAN Membership : 0001u

 

<Cmd>

<Description>

 

f

Toggle Port Ingress Filtering Enable/Disable

t

Toggle Acceptable Frame Type(All Frames/VLAN-Tagged Frames Only)

g

Set Tag/Untag Ports

q

Return to previous menu

root>

S)elect port N)ext port P)rev port

Specifying Tagging or No Tagging for a Port

Each VLAN maintains a list of ports that do not send tagged frames. When adding a port member to a VLAN, it is added to the untagged set by default. This means the frames sent out on this port will be untagged. Type s to select the port number, and then type g to set the port to send only tagged frames for any given VLAN.

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents IntraCore 35160 Series Quick Start Guide IntraCore 35160 Series Layer 2 Gigabit Switches User’s ManualTable of Contents Page Introduction FeaturesSwitchCore CXE2010 Package ContentsLEDs 2 IC35160-G 1 IC35160-TFront and Back Panel Descriptions Management and ConfigurationConsole Interface Web-Based InterfaceSnmp Management Installation Overview Hardware Installation and SetupSafety Overview Recommended Installation ToolsPower Requirements Installation into an Equipment RackEnvironmental Requirements Cooling and AirflowGbic Interfaces Installing a GbicConnecting Power Installing the Optional Emergency Power SupplyRemoving a Gbic Gbic Care and Handling1 10/100/1000BaseT Ports Cabling Procedures Connecting to the NetworkSetup Gigabit Ethernet Ports Cabling ProceduresConnecting to a Console Connecting Via Telnet Connecting Via the Web BrowserIP Assignment Changing the PasswordSimple Network Management Protocol Snmp Accessing a Submenu ConfigurationLogging Exiting a SubmenuGeneral Information Configuration MenuChanging System Administration Info Administration ConfigurationSystem IP Configuration Port ConfigurationChanging System IP Information Page Enabling or Disabling a Port Advanced Port ConfigurationSetting Port Default Priority Setting Port Class of ServiceSetting Port Maximum Packet Length Enabling or Disabling 802.3x Flow ControlGlobal Port Configuration Unicast Forwarding Database ConfigurationDisplaying the Forwarding Database Security Management Setting the MAC Address Age-Out TimeVlan Management Searching for a MAC AddressProtocol Configuration Snmp ConfigurationChanging Community Strings Adding or Updating a Trap Receiver Enabling Authentication TrapsDeleting a Trap Receiver Spanning Tree Protocol STP ConfigurationSpanning Tree Port Configuration Setting Port Priority and Path CostEnabling and Disabling STP Trunk Group Configuration QoS Priority Queue Management Defining the Priority ListAssigning Packets to Priority Queues Example User Interface Configuration Setting Console UI Time-out PeriodSetting SSH/Telnet UI Time-out Change Password Adding or Deleting an Access HostEnabling or Disabling SSH and Telnet Access Control System UtilitiesEnabling or Disabling the Web Server Port Mirroring Enabling or Disabling System Port MirroringAdding or Deleting a Monitor Port System Reset Resetting the SwitchSystem Clock System Log Scheduling a System ResetClearing the System Log Bootstrap ConfigurationTftp File Transfers Ping Utility StatisticsAdvanced Management Snmp and Rmon ManagementRmon Management Enabling and Disabling Duplicated IP Detection Duplicated IP Detection and TrapEnabling and Disabling Duplicated IP Trap Viewing a List of Duplicated IP AddressesEnabling and Disabling Station Movement Trap Configuring Port SecurityConfiguring Port Lock and Intruder Lock Configuring Port New Node Detection TrapConfiguring Security Level 2 or Level Port-based Network Access ControlSetting the Intruder Trap Resetting Security to DefaultsPage Name Description Port Control SettingsSetting Timers Setting Radius Parameters Radius Server IP Server Port Vlan Specifications for the IntraCore 35160 Series Other Vlan Features of the switchVlan Management Creating a Vlan Configuring Static Vlan GroupsAdvanced Static Vlan Configuration Setting the Port Vlan ID Configuring Vlan Port AttributesConfiguring Port Receive Frame Type Adding and Deleting VLANs from the PortDisplaying a Summary of Vlan Groups Setting Port TypeIP Multicast Traffic Management Resetting Vlan Configuration to DefaultsDisplaying a Vlan Port Summary Multicast AddressesConfiguring IP Multicast Traffic Management Igmp SnoopingEnabling and Disabling Igmp Snooping Displaying a Summary of Group Addresses Advanced Igmp ConfigurationAdding Ports to the Selected Address IP Multicast Forwarding Database ConfigurationInserting a Multicast Group Address Removing a Multicast Group AddressWeb-Based Management Accessing with a Web BrowserFront Panel Button Genl Info General Information ButtonManagement Buttons Port Config Port Configuration Button Span Tree Spanning Tree Button Addr Address Table Button Snmp ButtonVlan Configuration Vlan ButtonVlan Group Create Set Port Type Port ConfigurationPort Vlan ID Pvid Acceptable Frame TypeSecurity Button Trunking ButtonPort Ingress Filtering Tag/Untag Port Egress TypePage Snmp Management Snmp Management OperationsSnmp Protocol Community Name and Security MIB TreeName Space Path MIB Groups Supported VLANs Switching ConceptsPort-Based VLANs Vlan ID and Tagged FramesPort Vlan ID Spanning Tree ProtocolHow It Works Spanning Tree ParametersSpanning Tree Port Configuration Full Duplex, Flow Control, and Auto-negotiationFull Duplex Auto-Negotiation Flow ControlProblem Possible Solutions Appendix A. TroubleshootingAppendix B. Features and Specifications SpecificationsPhysical Characteristics Technical Support and Warranty Environmental RangeStandards Compliance Appendix C. FCC Compliance and Warranty Statements FCC Compliance Statement Important Safety InstructionsIntraCare Warranty Statement Page Appendix D. Console Port Pin Outs Pin Number Signal NameAppendix E. Online Warranty Registration Bootstrap Configuration Appendix F. BootP ConfigurationImage Banks Loading Software LocallyLoading Software Remotely BOOTP-TFTP
Top Page Image Contents