
Port Ingress Filtering
From the
Tag/Untag Port Egress Type
Click Tag Port Egress Type to set the port to send tagged frames for any given VLAN. Click Untag Port Egress Type to set the port to send untagged frames. See Chapter 4 Advanced Management for more information.
5.8 Trunking Button
The IC35160 supports link aggregation (port trunking). This feature is used to combine two or more links (ports) in order to increase the overall bandwidth of the link, thereby sharing or balancing the data load. Link aggregation creates better redundancy and fault tolerance, as network traffic is dynamically distributed across ports as links are added to the trunk. If a single cable goes down, the connection will not fail— especially important for mission critical links and server connections. See Chapter 3 Configuration for more information on port trunking.
5.9 Security Button
This button opens the Security page, which provides a summary of the security of each port on each switch, as shown below.
71