Asante Technologies 35160 user manual System IP Configuration, Port Configuration

Page 23

4.Press Enter. The system administration information changes take effect.

5.Type q to quit and return to the Configuration Menu.

3.4System IP Configuration

The System IP Configuration Menu displays, and allows the user to change, the information needed to access the switch over the network via in-band management.

IntraCore 35160-T System IP Configuration Menu

System MAC Address: 00:00:94:BF:00:46

System IP Address: xxx.xxx.xxx.xxx

System Subnet Mask: 255.255.255.0

System Default Router: xxx.xxx.xxx.xxx

<Cmd> <Description>

iSet IP Address

m Set Subnet Mask

r Set Default Router

q Return to previous menu

root>

Important! The default router address is set to 0.0.0.0.

Changing System IP Information

To change the IP address, subnet mask, or default router of the switch, use the following procedure:

1.Open the System IP Configuration Menu by typing i in the Configuration Menu.

2.Type the command letter (i, m, or r) of the option to change.

3.Type the new address at the prompt.

Important! Follow the format: number.number.number.number To cancel a change, press ctrl-cat the command prompt.

4.Press Enter. The IP setting change for the switch takes effect.

5.Type q to quit and return to the Configuration Menu.

3.5Port Configuration

The Port Configuration Menu allows the user to manually configure each port of the switch for port speed, duplex, and auto-negotiation. It also provides an overview of the entire system’s port operating status.

To access the Port Configuration Menu, type p in the Configuration Menu.

23

Image 23

Contents IntraCore 35160 Series Quick Start Guide IntraCore 35160 Series Layer 2 Gigabit Switches User’s ManualTable of Contents Page Introduction FeaturesLEDs SwitchCore CXE2010Package Contents 2 IC35160-G 1 IC35160-TFront and Back Panel Descriptions Management and ConfigurationSnmp Management Console InterfaceWeb-Based Interface Recommended Installation Tools Hardware Installation and SetupInstallation Overview Safety OverviewCooling and Airflow Installation into an Equipment RackPower Requirements Environmental RequirementsGbic Interfaces Installing a GbicGbic Care and Handling Installing the Optional Emergency Power SupplyConnecting Power Removing a Gbic1 10/100/1000BaseT Ports Cabling Procedures Connecting to the NetworkConnecting to a Console SetupGigabit Ethernet Ports Cabling Procedures Connecting Via Telnet Connecting Via the Web BrowserIP Assignment Changing the PasswordSimple Network Management Protocol Snmp Exiting a Submenu ConfigurationAccessing a Submenu LoggingGeneral Information Configuration MenuChanging System Administration Info Administration ConfigurationChanging System IP Information System IP ConfigurationPort Configuration Page Enabling or Disabling a Port Advanced Port ConfigurationEnabling or Disabling 802.3x Flow Control Setting Port Class of ServiceSetting Port Default Priority Setting Port Maximum Packet LengthGlobal Port Configuration Unicast Forwarding Database ConfigurationDisplaying the Forwarding Database Searching for a MAC Address Setting the MAC Address Age-Out TimeSecurity Management Vlan ManagementChanging Community Strings Protocol ConfigurationSnmp Configuration Adding or Updating a Trap Receiver Enabling Authentication TrapsDeleting a Trap Receiver Spanning Tree Protocol STP ConfigurationEnabling and Disabling STP Spanning Tree Port ConfigurationSetting Port Priority and Path Cost Trunk Group Configuration Assigning Packets to Priority Queues QoS Priority Queue ManagementDefining the Priority List Example Setting SSH/Telnet UI Time-out User Interface ConfigurationSetting Console UI Time-out Period Enabling or Disabling SSH and Telnet Change PasswordAdding or Deleting an Access Host Enabling or Disabling the Web Server Access ControlSystem Utilities Adding or Deleting a Monitor Port Port MirroringEnabling or Disabling System Port Mirroring System Clock System ResetResetting the Switch System Log Scheduling a System ResetClearing the System Log Bootstrap ConfigurationTftp File Transfers Ping Utility StatisticsRmon Management Advanced ManagementSnmp and Rmon Management Viewing a List of Duplicated IP Addresses Duplicated IP Detection and TrapEnabling and Disabling Duplicated IP Detection Enabling and Disabling Duplicated IP TrapEnabling and Disabling Station Movement Trap Configuring Port SecurityConfiguring Port Lock and Intruder Lock Configuring Port New Node Detection TrapResetting Security to Defaults Port-based Network Access ControlConfiguring Security Level 2 or Level Setting the Intruder TrapPage Name Description Port Control SettingsSetting Timers Server Port Setting Radius ParametersRadius Server IP Vlan Management Vlan Specifications for the IntraCore 35160 SeriesOther Vlan Features of the switch Creating a Vlan Configuring Static Vlan GroupsAdvanced Static Vlan Configuration Adding and Deleting VLANs from the Port Configuring Vlan Port AttributesSetting the Port Vlan ID Configuring Port Receive Frame TypeDisplaying a Summary of Vlan Groups Setting Port TypeMulticast Addresses Resetting Vlan Configuration to DefaultsIP Multicast Traffic Management Displaying a Vlan Port SummaryEnabling and Disabling Igmp Snooping Configuring IP Multicast Traffic ManagementIgmp Snooping Displaying a Summary of Group Addresses Advanced Igmp ConfigurationRemoving a Multicast Group Address IP Multicast Forwarding Database ConfigurationAdding Ports to the Selected Address Inserting a Multicast Group AddressWeb-Based Management Accessing with a Web BrowserManagement Buttons Front Panel ButtonGenl Info General Information Button Port Config Port Configuration Button Span Tree Spanning Tree Button Addr Address Table Button Snmp ButtonVlan Group Create Vlan ConfigurationVlan Button Acceptable Frame Type Port ConfigurationSet Port Type Port Vlan ID PvidTag/Untag Port Egress Type Trunking ButtonSecurity Button Port Ingress FilteringPage Snmp Protocol Snmp ManagementSnmp Management Operations Name Space Path Community Name and SecurityMIB Tree MIB Groups Supported Vlan ID and Tagged Frames Switching ConceptsVLANs Port-Based VLANsSpanning Tree Parameters Spanning Tree ProtocolPort Vlan ID How It WorksFull Duplex Spanning Tree Port ConfigurationFull Duplex, Flow Control, and Auto-negotiation Auto-Negotiation Flow ControlProblem Possible Solutions Appendix A. TroubleshootingPhysical Characteristics Appendix B. Features and SpecificationsSpecifications Standards Compliance Technical Support and WarrantyEnvironmental Range IntraCare Warranty Statement Appendix C. FCC Compliance and Warranty StatementsFCC Compliance Statement Important Safety Instructions Page Appendix D. Console Port Pin Outs Pin Number Signal NameAppendix E. Online Warranty Registration Loading Software Locally Appendix F. BootP ConfigurationBootstrap Configuration Image BanksLoading Software Remotely BOOTP-TFTP