Motorola MVME197LE manual Table A-1. ENV Command Parameters

Set Environment to Bug/Operating System

Table A-1. ENV Command Parameters

ENV Parameter and Options	Default	Meaning of Default
Bug or System Environment [B/S]	B	Bug is the standard
		mode of operation.
Field Service Menu Enable [Y/N]	N	Do no display the field
		service menu.
Remote Start Method Switch [G/M/B/N]	B	Use both the Global
		Control and Status
		Register (GCSR) in the
		VMEchip2, and the
		Multiprocessor Control
		Register (MPCR) in the
		shared RAM methods to
		pass and start execution
		of cross-loaded
		program.
Probe System for Supported Disk/Tape Controllers	Y	Accesses will be made
[Y/N]		to the VMEbus to
		determine the presence
		of supported controllers.
Negate VMEbus SYSFAIL* Always [Y/N]	N	Negate VMEbus
		SYSFAIL after the
		successful completion or
		entrance into the bug
		command monitor.
Local SCSI Bus Reset on Debugger Setup [Y/N]	Y	The local SCSI bus is
		reset on the debugger
		setup.
Local SCSI Bus Negotiations Type [A/S/N]	A	Use Asynchronous
		negotiations on the local
		SCSI bus.
Ignore CFGA Block on a Hard Disk Boot [Y/N]	Y	Enable the ignorance of
		the Configuration Area
		(CFGA) Block (hard
		disk only).
Auto Boot Enable [Y/N]	N	The Auto Boot function
		is disabled.

A

MVME197LEIG/D1 A-3