Motorola MVME197LE manual Ffbffffc

Set Environment to Bug/Operating System

Table A-1. ENV Command Parameters (Continued)

ENV Parameter and Options	Default	Meaning of Default
ROM Boot Abort Delay	0	Time in seconds that the
		ROMboot sequence will
		delay before starting.
		The purpose is to allow
		the user the option of
		stopping the boot by use
		of the Break key. The
		time value is from 0
		through 255 seconds.
ROM Boot Direct Starting Address	FF800000	First location tested
		when the Bug searches
		for a ROMboot Module.
		This is the start of the
		Flash memory space.
ROM Boot Direct Ending Address	FFBFFFFC	Last location tested
		when the Bug searches
		for a ROMboot Module.
		This is the end of the
		Flash memory space.
Network Auto Boot Enable [Y/N]	N	Network Auto Boot
		function is disabled.
Network Auto Boot at power-up only [Y/N]	Y	Network Auto Boot is
		attempted at power-up
		reset only.
Network Auto Boot Controller LUN	00	LUN of a disk/tape
		controller module
		currently supported by
		the Bug. Default is $0.
Network Auto Boot Delay	5	The time in seconds that
		the Network Boot
		sequence will delay
		before starting. The
		purpose of the delay is
		to allow the user the
		option of stopping the
		boot by use of the Break
		key. The time value is
		from 0 through 255
		seconds.

A

MVME197LEIG/D1 A-5