Billion Electric Company 7100SV manual Service Provider

Page 36

Billion BIPAC 7100SV VoIP ADSL Router

G.729A: Set the priority of voice compression to be used in the voice codec.

Please be noted. Then codec priority is selected using a drop-down box. If two codec type are assigned the same priority, then the priority is assigned in the order as G.711U > G.711A > G.729A in the decreasing order or priority. For example if the user selects 1, 2, 2 for G.711U, G.711A, and G.729A respectively, the application will assign priority as 1, 2, 3 for G.711U, G.711A and G.729A respectively.

3.4.3.3.2 Service Provider

This screen contains settings for register to get VoIP service from SIP service provider.

Registration Interval: specify the re-registration interval in seconds.

Authentication Method: specify the authentication method, currently MD5 is supported only.

Registrar Address: indicate the SIP registrar IP address

RegistrarPort: specify the port of the SIP registrar on which it will listen for register requests from VoIP device.

ProxyAddress: indicate the SIP proxy server IP address.

ProxyPort: specify the port of the SIP proxy server on which it will listen for messages.

OutbondProxyAddress: indicate the SIP outbound proxy server IP address. This parameter is very useful when VoIP device is behind a NAT.

32

Image 36

Contents Bipac 7100SV Page Chapter Appendix Chapter Introduction An Overview of Bipac 7100SVPackage Contents Bipac 7100SV FeaturesIntroduction Bipac 7100SV Application Lit green when power adapter is connected Lit green when the LAN link is connectedFront LEDs MeaningRear Ports CablingBefore Configuration Configuring PC in Windows XPBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows ConfigurationBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Information from ISP LAN Port WAN Port IP addressDhcp server function IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs Adsl Quick StartVoIP Quick Start 3.1 WAN Select AdapterConfiguration Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing 3.2 LAN Device IP AddressVoIP Configuration AuthorizationUserID Same as UserIDService Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer Password SystemTime Zone Upgrade Factory Setting RestartFirewall Packet FilteringBillion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Advanced Adsl3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration Diagnostic Test PPP Half Bridge Default at DisabledTesting Ethernet LAN connection Testing Adsl SynchronizationTest ATM OAM Segment Loop Back Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Test IP connect to PPPConfiguration Save Config Problems Starting Up the Adsl Router Corrective Action Problems with the WAN Interface Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion