Billion Electric Company 7100SV manual Factory Setting, Restart

Page 46

Billion BIPAC 7100SV VoIP ADSL Router

To upgrade the firmware of BIPAC 7100SV, you should download or copy the firmware to your local environment first. Press the “Browse…” button to specify the path of the firmware file. Then, click “Upgrade” to start upgrading. When the procedure is completed, BIPAC 7100SV will reset automatically to make the new firmware work.

3.4.3.4.4 Factory Setting

If for any reason, you have to reset this router back to factory default settings, be careful that the current settings will be lost and the settings are reset back to its default value. The factory default values is detailed in the section 3.2 ‘‘Factory Default Settings’’.

3.4.3.4.5 Restart

In case the router stops responding correctly or in some other way stops functioning, you can perform the restart. Your setting won’t be changed. Performing the restart, click on the Submit button.

42

Image 46

Contents Bipac 7100SV Page Chapter Appendix Chapter Introduction An Overview of Bipac 7100SVPackage Contents Bipac 7100SV FeaturesIntroduction Bipac 7100SV Application Front LEDs Lit green when power adapter is connectedLit green when the LAN link is connected MeaningRear Ports CablingBefore Configuration Configuring PC in Windows XPBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows ConfigurationBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Dhcp server function Information from ISPLAN Port WAN Port IP address IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs Adsl Quick StartVoIP Quick Start 3.1 WAN Select AdapterConfiguration Static IP Settings Service Category Select UBR or CBR Dhcp ClientMAC Spoofing 3.2 LAN Device IP AddressVoIP Configuration AuthorizationUserID Same as UserIDService Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer Password SystemTime Zone Upgrade Factory Setting RestartFirewall Packet FilteringBillion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Advanced Adsl3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration Testing Ethernet LAN connection Diagnostic TestPPP Half Bridge Default at Disabled Testing Adsl SynchronizationTest Ethernet connect to ATM Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test IP connect to PPPConfiguration Save Config Problems with the LAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion