Billion Electric Company 7100SV Front LEDs, Meaning, Lit green when power adapter is connected

Page 9

Chapter 2

Using Billion VoIP ADSL Modem/Router

2.1 Cautions for Using Billion VoIP ADSL Modem/Router

Do not place the router under high humidity and high temperature.

Do not use the same power source for the device with other equipment.

Do not open or repair the case yourself. If the device is too hot, turn off the power immediately and have a qualified serviceman repair it.

Avoid using this product and all accessories outdoors.

Place the product on the stable surface.

Only use the power adapter that comes with the package.

2.2 The Front LEDs

 

LED

 

 

Meaning

 

 

 

 

 

 

 

 

PWR

 

 

Lit green when power adapter is connected.

 

 

 

 

 

 

 

 

SYS

 

 

When flash, it indicates that the device is working properly.

 

 

 

 

 

 

 

 

Phone

 

 

Lit green when the phone is off hook.

 

 

 

 

 

 

 

 

LAN

 

 

Lit green when the LAN link is connected.

 

 

 

 

 

 

 

 

ADSL

 

 

When lit, it indicates that the ADSL (Line) port is connected to the DSLAM

 

 

 

 

and working properly.

 

 

 

 

 

 

 

 

 

 

 

 

5

Image 9
Contents Bipac 7100SV Page Chapter Appendix An Overview of Bipac 7100SV Chapter IntroductionBipac 7100SV Features Package ContentsIntroduction Bipac 7100SV Application Lit green when the LAN link is connected Lit green when power adapter is connectedFront LEDs MeaningCabling Rear PortsConfiguring PC in Windows XP Before ConfigurationBillion Bipac 7100SV VoIP Adsl Router Configuration Configuring PC in WindowsBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings LAN Port WAN Port IP address Information from ISPDhcp server function IP addresses forConfiguring with Web Browser Quick Start StatusStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP Status Status- PPP StatusRouting Table Status- Learned MAC TableSystem Log Adsl Quick Start Security LogsVoIP Quick Start Select Adapter 3.1 WANConfiguration Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing Device IP Address 3.2 LANVoIP AuthorizationUserID Same as UserID ConfigurationService Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer System PasswordTime Zone Upgrade Restart Factory SettingPacket Filtering FirewallBillion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Adsl Advanced3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration PPP Half Bridge Default at Disabled Diagnostic TestTesting Ethernet LAN connection Testing Adsl SynchronizationTest ATM OAM End-to-End Loop Back Test ATM OAM Segment Loop BackTest Ethernet connect to ATM Test IP connect to PPPConfiguration Save Config Problems with the WAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISPContact Billion Appendix