Billion Electric Company 7100SV manual Phone Book

Page 37

Chapter 3 Configuration

OutbondProxyPort: specify the port of the SIP outbound proxy on which it will listen for messages.

3.4.3.3.3 Phone Book

This screen contains settings for creating phone book for speed dial. You can dial the “#0” to inform VoIP device to dial the VoIP number in the entry 0 of phone book.

Speed Dial: There are ten entries from 0 to 9. When you dial “#0” mapping to entry 0 in the phone book.

Abstract Description: indicate the purpose or useful information for this entry.

Remote UserID: This is the UserID you want to contact. Refer UserID in VoIP -> Configuration -> UserID.

IP Address / Domain: indicate remote user’s IP address or domain name if this remote user does not register in the SIP server. If remote user is registered in the SIP server, this field is related to the SIP server’s IP / Domain name.

For examples:

If your friend Tim gives you a SIP URL as sip:89755@192.246.69.223 then you can enter the Phone book as: Remote UserID: 89755

IP Address / Domain: 192.246.69.223

33

Image 37

Contents Bipac 7100SV Page Chapter Appendix An Overview of Bipac 7100SV Chapter IntroductionBipac 7100SV Features Package ContentsIntroduction Bipac 7100SV Application Lit green when the LAN link is connected Lit green when power adapter is connectedFront LEDs MeaningCabling Rear PortsConfiguring PC in Windows XP Before ConfigurationBillion Bipac 7100SV VoIP Adsl Router Configuration Configuring PC in WindowsBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings LAN Port WAN Port IP address Information from ISPDhcp server function IP addresses forConfiguring with Web Browser Quick Start StatusStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP Status Status- PPP StatusRouting Table Status- Learned MAC TableSystem Log Adsl Quick Start Security LogsVoIP Quick Start Select Adapter 3.1 WANConfiguration Static IP Settings Service Category Select UBR or CBR Dhcp ClientMAC Spoofing Device IP Address 3.2 LANVoIP AuthorizationUserID Same as UserID ConfigurationService Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer System PasswordTime Zone Upgrade Restart Factory SettingPacket Filtering FirewallBillion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Adsl Advanced3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration PPP Half Bridge Default at Disabled Diagnostic TestTesting Ethernet LAN connection Testing Adsl SynchronizationTest ATM OAM End-to-End Loop Back Test ATM OAM Segment Loop BackTest Ethernet connect to ATM Test IP connect to PPPConfiguration Save Config Problems with the WAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the LAN Interface Corrective Action Problems Connecting to a Remote Node or ISPContact Billion Appendix