Billion Electric Company 7100SV manual Intrusion Detection

Page 50

Billion BIPAC 7100SV VoIP ADSL Router

Enable Bridge Filtering: Check Yes to enable this function or check No to disable.

Src MAC: Enter the source MAC address.

Dest MAC: Enter the destination MAC address.

Type: Enter the Ethernet type.

Block Forward: Check Block if you want to block requests from the source MAC address sending to the destination MAC address. Check Forward if you want to forward requests from the source MAC address sending to the destination MAC address.

3.4.3.5.3 Intrusion Detection

Check “Enable” if you want to detect invader sneak in your computer without permitted .The ADSL Router can automatically detect and block the DoS (Denial of Service) attack if user enables this function. This kind of attack is not to achieve the confidential data of this network; instead, it aims to crush specific equipment or the entire network. If this happens, the users will not be able to access the network resources. There are few samples of hacker patterns implemented as below.

-IP Spoofing

-Ping of Death (Length > 65535)

-Land Attack (Same source / destination IP address)

-IP with zero length

-Sync flooding

-Smurf Attack (ICMP Echo with x.x.x.0 or x.x.x.255)

-Snork Attack

-UDP port loop-back

-TCP NULL scan

46

Image 50

Contents Bipac 7100SV Page Chapter Appendix Chapter Introduction An Overview of Bipac 7100SVPackage Contents Bipac 7100SV FeaturesIntroduction Bipac 7100SV Application Front LEDs Lit green when power adapter is connectedLit green when the LAN link is connected MeaningRear Ports CablingBefore Configuration Configuring PC in Windows XPBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows ConfigurationBillion Bipac 7100SV VoIP Adsl Router Configuring PC in Windows 95/98/ME Then select the DNS Configuration Configuring PC in Windows NT4.0 Factory Default Settings Dhcp server function Information from ISPLAN Port WAN Port IP address IP addresses forConfiguring with Web Browser Status Quick StartStatus Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status Status- PPP Status LAN Status TCP StatusStatus- Learned MAC Table Routing TableSystem Log Security Logs Adsl Quick StartVoIP Quick Start 3.1 WAN Select AdapterConfiguration MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings 3.2 LAN Device IP AddressVoIP Configuration AuthorizationUserID Same as UserIDService Provider Phone Book Dial Plan Call Feature CallForwarding 3.3.6 PTM Ring Tone Configuration Timer Password SystemTime Zone Upgrade Factory Setting RestartFirewall Packet FilteringBillion Bipac 7100SV VoIP Adsl Router Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Advanced Adsl3.7.2 DNS Dynamic DNS 3.7.4 NAT Configuration 3.7.5 RIP Static Route Misc Configuration Testing Ethernet LAN connection Diagnostic TestPPP Half Bridge Default at Disabled Testing Adsl SynchronizationTest Ethernet connect to ATM Test ATM OAM Segment Loop BackTest ATM OAM End-to-End Loop Back Test IP connect to PPPConfiguration Save Config Problems with the LAN Interface Corrective Action Problems Starting Up the Adsl Router Corrective ActionProblems with the WAN Interface Corrective Action Problems Connecting to a Remote Node or ISPAppendix Contact Billion