Iomega 03798300 owner manual CD drive, If the Iomega software setup program does, Software

Page 23

Installing the IomegaWare™ Software

1	Insert the IomegaWare™ CD into the computer’s
	Insert the IomegaWare™ CD into the computer’s
	CD drive.

Installation Guide

M No CD Drive? If you want to install the Zip® Internal drive on a computer that does not have a CD drive, you can download Iomega software from the Internet. You can also create an install floppy diskette for installing only the critical software drivers. Refer to How to Install Without a CD drive on page 25 for additional information. M

2	If the Iomega software setup program does
	If the Iomega software setup program does
	not start automatically, follow these steps:
	a) Open My Computer, Windows Explorer, or File Manager.
	b) Double click the CD drive letter (usually D:, E:, or F:).
	c) Double click Setup.exe.
3	Follow the screen instructions to install the
	software.

23

Image 23

Contents Internal Atapi Drive Table of Contents Welcome to Zip Drive Unpack the Zip Internal Atapi drive Check system requirementsInternal Atapi drive for future reference Disconnect the computer power cordWatch the instructional video Write down the serial number of your ZipIdentifying the computer’s IDE configuration Follow these instructions if you were unable to Identify your computer’s IDE configurationLocate the IDE channels using the CD drive 1b Locate the IDE channels using the computer’s hard drive1c Possible IDE channel locations If the hard drive is the only IDE device connected Determining your computer’s configurationInstallation Guide Panel cover Check the jumper setting on the Zip driveGuide Currently connected to your CD drive Slide the Zip drive into the drive bayRemove the IDE Interface cable that is Verify that the jumper on your CD drive is set to Master Secure drive in drive bay Connect an internal computer power supplyCable to the Zip drive Guide Locate a vacant 31/2 or 51/4 drive bay Change the jumper setting to Master2a3 1/2 drive bays only May require side railsPIN Locate the data cable that comes packagedWith the Zip drive. Find the colored stripe or Print on one side of the data cable showingZip drive Internal drive. M Cable to your Zip driveGuide Software If the Iomega software setup program doesCD drive Not start automatically, follow these stepsWindows 95/98 Users Additional instructions for your systemDownload Software from the Iomega Web Site How to Install Without a CD DriveCreate Install Floppy Diskettes Installation Guide Inserting Zip Disks Operating Your Zip DriveDrive Sleep Disk Eject in Case of Power LossEjecting Zip Disks Compatibility with 100MB Zip Disks Zip Tips Iomega Tools Step Backup/RestoreRecordIt Software Copy MachineDrive Shortcuts For information on how to use IomegaWare softwareCopying Zip Disks Backing Up with Zip DisksFormatting Zip Disks under Windows 95/98 or NT Installing Applications to Zip DisksFormatting Zip Disks Read/Write Protecting Zip Disks Setting Zip Disk Protection under Windows 95/98 and NTHow IDE Works What is IDE?What is ATAPI? Jumper SettingsMaster Drive Possible System IDE/ATAPI ConfigurationsBIOS/CMOS Support Slave DriveGreen activity light on the Zip drive does not turn on TroubleshootingTroubleshooting Installing the Zip drive changes other drive letters Data transfer problems or drive operation is erraticWindows 95/98 Users Troubleshooting You want to use Windows 95/98 DOS mode with your Zip drive Automated Voice Technical Support How to Get HelpOne-on-One Iomega Technical Support Automated FAX-back Help 801 778-5763 U.S. & CanadaInternational Support Numbers Limited Warranty InformationReturn or Repair Product InformationCE European Community Regulatory InformationModel Number Z250ATAPI FCC United States Canadian VerificationVisit our web site