11.Click the “Install” button. Windows NT will copy the driver file and add the Iomega Zip® driver to the list of installed adapters found by the system.
12.Click the “Close” button and exit Windows NT Setup.
13.Click “OK” at the message box and reboot the system.
14.Your Zip® drive and Iomega software should now be ready to use.
If your drive letters change after installing the Zip® Internal drive:
Refer to the Troubleshooting section starting on page 38 for instructions on how to assign a specific drive letter for your Zip® drive.
How to Install Without a CD Drive
If you need to install or use your Zip® drive on a computer that does not have a CD drive, you can download Iomega software from the Internet or install the necessary driver software from a floppy diskette.
Download Software from the Iomega Web Site
Visit Iomega’s web site for the latest version of Iomega software. All components of the IomegaWare™ software package can be downloaded.
1.Visit the Iomega web site at http://www.iomega.com.
2.Click on Software Download to find the Iomega software package for your system.
Create Install Floppy Diskettes
If you have access to a computer that has a CD drive, you can create floppy diskettes for installing the necessary driver software:
MNOTE: The floppy install diskette can only be used on a PC. The install diskette includes only the driver software required to provide access to the Zip® drive, not the complete Iomega software package.
You can download all components of the software package from Iomega’s web site. M
1.Insert a blank floppy diskette into the computer’s floppy drive.
2.Insert the IomegaWare™ CD into the CD drive. If the Setup program starts automatically, cancel by clicking Exit Setup.
3.Open My Computer or Windows Explorer, right click on the icon for the IomegaWare CD, and select Explore from the shortcut menu.
Installation Guide
25