Multitech MT5600BAV.92, MT5600BAV.90 manual Install the Modem Driver, Removing an Old Modem Driver

Page 9

Chapter 2 - Installation

Step 2: Install the Modem Driver

If you use Windows 95/98/Me/NT 4.0/2000/XP; you must install the modem driver. The drivers are installed easily since Windows supports Plug-and-Play.

Installing the Modem Driver for Windows 95/98/Me/2000/XP

1.Make sure your modem is connected properly, and then turn on your computer. Windows should detect your new modem and open the Install New Modem wizard.

Note: If Windows cannot find a modem, your modem may be turned off, it may be plugged into the wrong connector on your computer, or the serial cable may be faulty. See “None of the LEDs Light When the Modem Is Turned On” and “The Modem Does Not Respond to Commands” in the “Troubleshooting” chapter.

2.Insert the MultiModemII system CD into your CD-ROM drive, and then click OK.

3.Windows installs and configures the modem.

4.Click Finish to exit.

Installing the Modem Driver for Windows NT

1.Make sure your modem is connected properly, and then turn on your computer. Windows should detect your new modem and open the Install New Modem wizard.

Note: If Windows cannot find a modem, your modem may be turned off, it may be plugged into the wrong connector on your computer, or the serial cable may be faulty. See “None of the LEDs Light When the Modem Is Turned On” and “The Modem Does Not Respond to Commands” in the Troubleshooting chapter of the User Guide.

2.In the Install New Modem wizard, select Don’t detect my modem; I will select it from a list, and then click Next. A dialog box with a list of manufacturers and a list of modem models appears.

3.Insert the MultiModemII system CD into your CD-ROM drive, and then click Have Disk.

4.In the Install from Disk dialog box, select the drive that the CD is in, and then click OK.

5.A list of modems appears. Select your modem and click Next.

6.Select the port that the modem is connected to, and then click Next.

7.Windows installs and configures the modem.

8.Click Finish to exit.

Removing an Old Modem Driver

When your new modem replaces another modem, the old modem driver remains in Windows, and the old modem driver is still selected in HyperTerminal and other Windows applications. Though you can change the application connection descriptions one at a time, it is easier to force Windows applications to use the new modem by removing the old modem driver from Windows.

1.Click the Start button, point to Settings, and click Control Panel.

2.Double-click the Modems icon to open the Modems Properties dialog box.

3.In the list box, select the old modem.

4.Click Remove, and then click Close.

5.The next time you dial a HyperTerminal connection, it will select your new modem and ask you to confirm the selection.

MT5600BA/BL Series User Guide

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MT5600BA-V.92 MT5600BA-V.90 MT5600BL-V.90 MT5600BA/BL SeriesRevision Date Description Table of Contents Contents Description and Features FeaturesProduct Description Safety Warnings Connect the Modem to Your System InstallationConnect the Phone to the Modem Optional Removing an Old Modem Driver Install the Modem DriverMT5600BA-V.92 Only Country Code ConfigurationInstall Phone Tools Using the Front Panel Modem ConfigurationLED Indicators Liquid Crystal Display LCD Option SelectionMenu Structure Twigs Menu OverviewStatus Trunk Basic Options Trunk From previous Advanced Options Trunk Advanced Options Trunk Diagnostic Options Trunk Remote Configuration Options TrunkCaller ID Options Trunk Phone Number Memory Options TrunkStatus Menu OptionsBasic Options Using the Front Panel Advanced Options Using the Front Panel Remote Configuration Options Diagnostic OptionsPhone Number Memory Options Caller ID Options Leased-Line Operation Two-Wire SetupFour-Wire Setup Dial Backup and Leased Line Restoral Setup Dial Backup and Leased-Line RestoralLeased Line Operation Remote Configuration Changing the Remote Escape Character Callback Security Setup ProceduresFront Panel Method Assigning Callback PasswordsAssigning Callback Phone Numbers Calling Procedure Callback Enable/Disable Callback Security CommandsCallback Assignments Form None of the Indicators Light TroubleshootingModem Does Not Respond to Commands Modem Cannot Connect When Dialing Modem Disconnects While Online Modem Cannot Connect When Answering File Transfer Is Slower Than It Should BeData Is Being Lost There Are Garbage Characters on the Monitor Modem Doesn’t Work with Caller IDFax and Data Software Can’t Run at the Same Time FCC Part 68 Telecom Appendix a Regulatory ComplianceCanadian Limitations Notice Fax Branding StatementEMC, Safety, and R&TTE Directive Compliance International Modem RestrictionsNew Zealand Telecom Warning Notice South African Notice Modem Compatibility Appendix B Technical SpecificationsTransmission Level Multi-Tech Systems, Inc. Warranty & Repairs Policies Appendix C Warranty, Service, Technical SupportRepair Procedures for International Distributors Online Warranty Registration ServiceInternational Customers outside U.S.A. and Canada Replacement PartsInternet Sites Technical SupportAppendix D Upgrading the Firmware Upgrade OverviewIntroduction Identify the Modem FirmwareDownload the Upgrade File Extract the Upgrade FilesIdentify the Current Firmware Version Upgrade the Modem’s Firmware Restore Your ParametersClear Your Stored Paramenters Appendix E Installing a Modem Under Linux Using the Modem to Call the Internet RS-232 Pin Descriptions Appendix F Pin DescriptionsRDL RS-232 Cable PinoutsFig. F-3. Macintosh cable Leased Line PinoutsIndex Index
Top Page Image Contents