Multitech MT5600BAV.92, MT5600BAV.90 manual Assigning Callback Passwords, Front Panel Method

Page 36

Chapter 6 - Callback Security

Front Panel Method

1.Turn on the modem.

2.Starting at the STATUS screen, press the following buttons on the front panel to turn callback security on and off:

· To turn on callback security, press , , ◊, , , ◊, ◊ to display the CALLBACK ON? option, and then press the Enter button to select the option. When remote callback security is turned on, each caller is asked to enter a password, then is disconnected and called back by the modem. Also, dialing number locations 0–3, for use with the DS=y dialing command, are replaced by callback dialing number locations 1–30.

·To turn off callback security, press , , ◊, , , ◊, ◊, ◊ to display the CALLBACK OFF? option, and then press the Enter button to select the option. Callers no longer need a password to connect to the modem, the modem is unable to call them back, and stored dialing number locations 0–3 become available.

Assigning Callback Passwords

AT Command Method

1.Open a terminal program, such as HyperTerminal.

2.To store a callback password for the first callback memory location, type AT#CBP01=xxxxxxxxxx, where xxxxxxxxxx is the first password, and press ENTER. The password must be six to ten characters in length.

3.To store a callback password for the second callback memory location, type AT#CBP02=xxxxxxxxxx, where xxxxxxxxxx is the second password, and press ENTER. Note that the memory location number in the command is incremented by one.

4.Repeat as many times as necessary, up to memory location 30, until all pass- words have been entered.

Front Panel Method

1.Turn on the modem.

2.Starting at the STATUS screen, press the following buttons on the front panel: , , ◊, , , ◊, , ◊. The ENTER PASSWORD #1? screen appears.

3.Press the Enter button on the front panel to select callback memory location 1. The ENTER PASSWORD screen appears.

4.Press the 〈⇓ or button several times to select the first letter in the password.

5.Press the ◊ button to go to the next letter in the password.

Note: To backspace or to cancel an entry, press ◊ several times.

6.The password must be six to ten characters in length. Repeat steps 4 and 5 until the password is entered, and then press the Enter button to store it. The PASS- WORD STORED screen should appear.

MT5600BA/BL Series User Guide

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents MT5600BA/BL Series MT5600BA-V.92 MT5600BA-V.90 MT5600BL-V.90Revision Date Description Table of Contents Contents Description and Features FeaturesProduct Description Safety Warnings Installation Connect the Modem to Your SystemConnect the Phone to the Modem Optional Install the Modem Driver Removing an Old Modem DriverCountry Code Configuration MT5600BA-V.92 OnlyInstall Phone Tools Using the Front Panel Modem ConfigurationLED Indicators Liquid Crystal Display LCD Option SelectionMenu Structure Menu Overview TwigsStatus Trunk Basic Options Trunk From previous Advanced Options Trunk Advanced Options Trunk Remote Configuration Options Trunk Diagnostic Options TrunkPhone Number Memory Options Trunk Caller ID Options TrunkMenu Options StatusBasic Options Using the Front Panel Advanced Options Using the Front Panel Remote Configuration Options Diagnostic OptionsPhone Number Memory Options Caller ID Options Two-Wire Setup Leased-Line OperationFour-Wire Setup Dial Backup and Leased-Line Restoral Dial Backup and Leased Line Restoral SetupLeased Line Operation Remote Configuration Changing the Remote Escape Character Setup Procedures Callback SecurityAssigning Callback Passwords Front Panel MethodAssigning Callback Phone Numbers Calling Procedure Callback Security Commands Callback Enable/DisableCallback Assignments Form Troubleshooting None of the Indicators LightModem Does Not Respond to Commands Modem Cannot Connect When Dialing Modem Disconnects While Online Modem Cannot Connect When Answering File Transfer Is Slower Than It Should BeData Is Being Lost There Are Garbage Characters on the Monitor Modem Doesn’t Work with Caller IDFax and Data Software Can’t Run at the Same Time Appendix a Regulatory Compliance FCC Part 68 TelecomFax Branding Statement Canadian Limitations NoticeEMC, Safety, and R&TTE Directive Compliance International Modem RestrictionsNew Zealand Telecom Warning Notice South African Notice Appendix B Technical Specifications Modem CompatibilityTransmission Level Appendix C Warranty, Service, Technical Support Multi-Tech Systems, Inc. Warranty & Repairs PoliciesOnline Warranty Registration Service Repair Procedures for International DistributorsReplacement Parts International Customers outside U.S.A. and CanadaTechnical Support Internet SitesUpgrade Overview Appendix D Upgrading the FirmwareIntroduction Identify the Modem FirmwareDownload the Upgrade File Extract the Upgrade FilesIdentify the Current Firmware Version Upgrade the Modem’s Firmware Restore Your ParametersClear Your Stored Paramenters Appendix E Installing a Modem Under Linux Using the Modem to Call the Internet Appendix F Pin Descriptions RS-232 Pin DescriptionsRS-232 Cable Pinouts RDLLeased Line Pinouts Fig. F-3. Macintosh cableIndex Index
Top Page Image Contents