Technics DP-1810P manual Digital Skyshot Mode, None, Normal, Quality

Other Features

Skyshot Mode

■Skyshot allows copying a manuscript without generating dark borders

even if the platen cover or ADF is opened.

Skyshot mode eliminate dark borders around the originals, and is especially convenient for copying small-sized originals like bank checks or documents with unusual shapes (round, oval, etc.). These documents can be reproduced without generating any unnecessary black areas simply by making a copy with the cover open.

Two types of Skyshot modes can be selected;

Digital Skyshot Mode : The scanning area (size) is not pre-determined.

Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance. (See page 29)

■Digital Skyshot Mode

1

Place the Original on the platen (Opening the Platen Cover/ADF)

	�
2	3

Number of	Press
Copies	Start Key

Note:The default setting of Digital Skyshot Mode is “NORMAL”. In this setting, the unit scans once. If there are black areas around the borders in the copies, set the Digital Skyshot Mode to “QUALITY” to soften the dark borders. In this setting, the unit scans twice.

FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧

2:COPIER SETTINGS PRESS SET TO SELECT

#Press the 2 key to select COPIER SETTINGS.

$Press the SET key.

COPIER PARAM. (00-14) ENTER NO. OR ∨ ∧

06 DIGITAL SKYSHOT 2:NORMAL

%Press 6 and SET key to select DIGITAL SKYSHOT.

&Press 1-3key to select the Digital Skyshot Mode.

1: OFF	NONE
2: NORMAL	Default setting (usually select this
	mode).
3: QUALITY	For better definition, select the
	Quality mode.

(Press the SET key.

)Press the Reset key.

NOTE	CAn incorrect exposure may occur when there is a black line at the edge of
	the original or an image which the copier interprets as a black pattern in the
	Skyshot mode.

CAn incorrect position detection of the original may occur when a strong light shines onto the glass during Skyshot mode.

22