Technics manual Specifications, DP-1810P Copier

Page 49

Specifications

■DP-1810P (Copier)

Type:	Desktop

Platen Type:	Fixed

Acceptable Originals:	Sheets, Books (max. Ledger)

Copying Method:	Laser Electrophotography

Fixing Method:	Heat Roller Fixing

Imaging Method:	Dry-Type Single component imaging

Resolution:	Max. 600 dpi

Maximum Copy Size:	Ledger - Invoice via paper tray

Void Area:	Max. 0.2 in (5 mm)

Warm Up Time:	Approx. 30 seconds (68°F/20°C)

First Copy Time:	Approx. 6.5 seconds (Letter , from 1st tray)

Multi-Copy Speed:	18 Letter size copies per minute

Enlargement Ratios:	Preset: 121%, 129%, 155%, 200%
	Variable: from 101% to 200% in 1% increments

Reduction Ratios:	Preset: 79%, 77%, 65%, 61%, 50%
	Variable: from 99% to 50% in 1% increments

Paper Feed:	Paper tray (550 sheets ⋅ 1) + Sheet bypass (50 sheets)
	2nd Paper feed module (550 sheets - option)

Paper Weight:	Paper Tray: 16 - 24 lb (60 - 90 g/m2)
	[Sheet Bypass: 15 - 34 lb (56 - 128 g/m2)]
Quantity Selector:	Max. 999 sheets (output tray capacity is 250 sheets)

Electrical Requirements:	AC 120V, 50/60Hz, 9A

Energy Consumption:	Max. 1.2 kW, 1.5 Wh in Sleep Mode

Dimensions (W ⋅ D ⋅ H):	23.1 ⋅	23.8 ⋅	18.0 in
	(588 ⋅	605 ⋅	458 mm)

Weight:	90 lb (41 kg)

Operating Environment:	Temperature: 50°F (10°C ) - 95°F (35°C) Relative Humidity: 45% - 85%
	(However, the humidity should be 70% or less at a temperature of 95°F (35°C),
	and the temperature should be 86°F (30°C) or less at a humidity level of 85%.)

CSpecifications are subject to change without notice.

49

Others

Image 49

Contents Options Before StartingEnglish Others Model and Serial Number Important InformationCommon Features and Usage Operation ChartEnergy Star Table of Contents Options Problem SolvingOthers For Your Safety PrecautionsLaser Safety Manufacturer’s name and address Factory IDToner and Paper Ventilation HandlingFCC Warning For U.S.A InstallationControl Panel LCD Display Contents Refer to Stop KeyStart Key Interrupt Key, Memory In Key, M1/M2 KeysFull Size Copying Basic CopyCopying the Same Size Originals $Select exposure controlReset Copying with Preset RatiosReduction or Enlargement Copying SizeZoom Zoom Copying$Adjust the side guides Using the Sheet BypassCopying on Special Paper, etc Sheet Bypass Side GuidesProcedure Creative Features1 Copy 1 keyCopy CopyBook Book/Edge/MarginEdge MarginTo store a job in memory Job MemoryTo recall a job stored in memory $Press the Memory In F2 keySort Copy Sort CopyFrom Platen Glass only Energy Saver/Interrupt Mode Other FeaturesEnergy Saver Mode Sleep ModeDigital Skyshot Mode Skyshot ModeNone NormalPlaten Manual Skyshot ModeOriginal Combined Function TableSort CopyFunction Using Function Modes to Change the Initial Copy ModesOptions Input Identification CodeGeneral Functions Modes Function Initial SettingModes Function Copier SettingsGeneral Functions for Key Operator Copier Settings for Key Operator Changing the Auto Exposure Setting Function SettingPress the Function Key Proceed as Follows Changing the Paper Size Function Setting for Key OperatorB5R Stopper Guide a Paper Guide b PaperFunctions Departmental CounterSelect the Department Counter Mode Components AccessoriesADF DA-AS180 Automatic Document Feeder# Automatic Original Feeding $2 in 1 CopyInappropriate originals Place OriginalAdding Paper J Problem SolvingSheet Paper Tray Cap Adding the Toner and Replacing Toner Waste Container ?Problem Solving Paper Misfeed Locations Removing a Misfed PaperPaper Exit Area Hot Paper Entry/Transport AreaHeated SurfacePaper Feed Module ADF Before Calling Service TroubleshootingCheck Action Unit Does Not OperateMarked Copies Light CopiesCode Display Message Check Points User Error Codes U CodeCover GlassDP-1810P Copier Specifications2nd Paper Feed Module DA-DS182 SpecificationsFor Printer Options and SuppliesSupplies Part Name RemarksPage Page Warranty