FOCUS Enhancements FS-2/2E manual Timecode or User Bit Value, Current Disk Volume, Folder Display

Page 27

FS-2/2E FUNCTIONS

NOTE: The FS-2/2E will not accept NDF TC values in DF TC mode.

AUDIOMETER - Displays left and right levels in db. The scale indicates -10db, -4db, and 0db. This display mode is only available for the FS-2E, or the FS- 2 (with the 2.0 upgrade).

The 2 lines on the menu appear similar to the following:

-10 -4 0

R------------------

L-----------------

(7) Timecode or User Bit Value

Displays the timecode or user bit value of display mode selected as follows:

00;00;00;00 - Drop Frame 00:00:00:00 - Non Drop Frame

(8) Current Disk Volume

Displays the current disk volume in relation to available space.

(9) Available Space on Volume

Displays the space in time available on the current volume, for example,

DISK 1 183min - Current Disk time remaining is 183 minutes

NO DISK - No attached Disk

(10) Folder Display

In record or playback, this displays the particular folder a clip is in (if applicable). If playing an entire folder (PLAY FROM menu set to particular folder), it displays the folder name as follows: [FOLDER].

(11) Soft Key One (MENU) Function Display

Displays the current function related to Soft Key one (left key on the top row of buttons). You can use this key for opening the FS-2/2E Menu and also as a STOP key during a recording.

(12) Soft Key Two (DISP) Function Display

Displays current function of Soft Key two (middle key on the top row of buttons). This changes the TC display between COUNTER, REMAINING, DV TC (NTSC or PAL), USER BIT, and ABSOLUTE when in record or playback modes. For the FS-2E, or the FS-2 with the 2.0 upgrade, there is an additional AUDIOMETER display mode.

(13) Soft Key Three (SHFT) Function Display

Displays current function of Soft Key three (right key on the top row of buttons).

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 6

Part Number: MANL-0927-03

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Release FS-2/2E Studio DTETelephone Fax Address Contacting Focus Enhancements Office HoursInformation to User Important Safety InstructionsGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents PAL/NTSC Using the FS-2/2ETable of Contents Reference FS-2/2E? What is a DTE DiskWhat is the FireStore Recorder?Package Contents Basic ApplicationsReceiving, Unpacking, and Inspecting Installation Site Requirements Mounting in a 19 Electronics RackInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Formatting the Drive Setting the Time and DateForward Replacing the Power Module FuseEdit Function Keys Edit/Utility/Input ButtonsInput Source Selection Keys Utility Function KeysTransport Control Keys LCD Menu Soft KeysNo Disk Detected Menu Welcome To FIRESTORE2-E Please WaitLCD Display Forward Search KeyRecord/Play Status Indicator Volume NumberPlay/Record Status Symbol Timecode/User Bit Display ModeFolder Display Current Disk VolumeAvailable Space on Volume Timecode or User Bit ValueFS-2/2E Menus and Functions USER/PASSWORD View IP Info Audio in Levels TC ModeDISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot COMPOSITE, Component Network SetupRecord Menu Menu ItemsSub-Menu Available Soft KeysRetro Cache Still Loop RecordRemote Control Mode MenuTime Lapse LocalAV/C Play Mode Menu Play List Play From Mode MenuPlaylist Menu Track ListEdit OpenSave NewClip Info HDD Delete ITEM?Insert Item ExitnextHDD Bypass Internal HDDDelete List Set Date & Time Setup MenuSET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Record Format MenuOS Version # OS UpgradeRS422 Remote Upgrade System Firmware Exit YESUpgrade will Erase Current CONTINUE? Exit YES Ntsc PAL ExitAudio In Levels TC ModeAudio Input Composite Video Component SDI ExitselDROP/NON Drop Exit SELTC Set TC Delay FS-2E only On Screen DisplayFF/RW Hi Res GPI Port BacklightStop Output Analog Out Audio CorrectPreferences Folder PrefNetwork Setup Dhcp Disabled Not Connected Next USERFS2 Paswdfocus Exit Save NextFTP Telnet WEB Exitsel Compnt Level Utilities MenuRef Video Video Out AdjOrganize Keep CLIPS? Exit YES no Organize PinnOrganize Organize ClipDelete Clip Format DiskPartition File Name Factory ResetDiagnostic RepairUsing the FS-2/2E Using the FS-2/2EHow to Make a Recording How to PlaybackHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Creating a Playlist Dismounting FireWire Disk Drives MacintoshHow to Mark Scenes Menu Disp Shft Connecting the FS-2/2E to a NetworkCounter DiskTechnical Specifications ReferenceComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out RPM Balanced OutputsSNR Headphone Output 1 x 1/4 TRS jack w/ level controlJog Speed Parameters Supported RS422 CommandsFS-2/2E LCD Display Modes Shuttle Speed ParametersAuto Custom CommandsCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents