FOCUS Enhancements FS-2/2E manual Upgrade System Firmware Exit YES, Ntsc PAL Exit, RS422 Remote

Page 42

FS-2/2E FUNCTIONS

appears:

UPGRADE

SYSTEM

FIRMWARE

EXIT

YES

NO

STEP 11: Select YES. You are warned with the following display:

UPGRADE WILL

ERASE CURRENT

OS!!!

CONTINUE?

EXIT

YES

NO

STEP 12: Select YES to begin the OS upgrade.

A message appears indicating the upgrade has begun.

STEP 13: After upgrade is complete, power cycle the FS-2/2E. The new software should now be loaded and ready to use.

If no .bin file is found, the screen displays “OS UPGRADE ERROR”. Check your connections and make sure you have the correct file name.

You must restart your system once an OS upgrade is complete.

NOTE: If you need to restore the factory default Operating System, hold down the Left and Middle soft keys under the LCD during boot up.

PAL/NTSC

Use this screen to select the record standard as either PAL or NTSC. The highlighted selection is the current one after exit. The FS-2/2E uses this video standard for both playback and record.

NTSC

PAL

EXIT

NOTE: Do not combine PAL and NTSC clips on a single drive.

RS422 Remote

This submenu allows you to setup the FS-2/2E for remote operation using the RS422 control port.

For easy integration with existing control systems, you can make the FS-2/2E look like either a Sony BVW-75 Betacam SP deck or a generic recorder. Using the TC SOURCE submenu, you can also select the timecode source for FS-2/2E control. Options are ABS, DV and COUNTER.

TYPE

TC SOURCE

EXIT

You can set the FS-2/2E to two different remote modes:

BVW-75 – The FS-2/2E appears as and is identified as a Sony BVW-75 BetaSP deck to the remote control device.

NOTE: Some BVW-75 control func- tions are not available on the FS-2/2E. The FS-2/2E mainly responds to com- mands such as PLAY, STOP, REWIND, REC, FF, and so on. Com- mands such as Insert, Edit, and other specialty commands are not possible.

Refer to “Supported RS422 Com- mands” on page 4-3 for more informa- tion on supported commands.

Generic - The FS-2/2E appears as and is identified as a generic device to the remote controller.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 21

Part Number: MANL-0927-03

Page 41 Page 43
Image 42
Page 41 Page 43
Contents FS-2/2E Studio DTE ReleaseContacting Focus Enhancements Office Hours Telephone Fax AddressImportant Safety Instructions Information to UserGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents Using the FS-2/2E PAL/NTSCTable of Contents Reference Recorder? What is a DTE DiskWhat is the FireStore FS-2/2E?Package Contents Basic ApplicationsReceiving, Unpacking, and Inspecting Installation Site Requirements Mounting in a 19 Electronics RackInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Setting the Time and Date Formatting the DriveReplacing the Power Module Fuse ForwardEdit/Utility/Input Buttons Edit Function KeysUtility Function Keys Input Source Selection KeysLCD Menu Soft Keys Transport Control KeysForward Search Key Welcome To FIRESTORE2-E Please WaitLCD Display No Disk Detected MenuTimecode/User Bit Display Mode Volume NumberPlay/Record Status Symbol Record/Play Status IndicatorTimecode or User Bit Value Current Disk VolumeAvailable Space on Volume Folder DisplayFS-2/2E Menus and Functions COMPOSITE, Component Network Setup Audio in Levels TC ModeDISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot USER/PASSWORD View IP InfoSoft Keys Menu ItemsSub-Menu Available Record MenuRetro Cache Loop Record StillLocal Control Mode MenuTime Lapse RemoteAV/C Play Mode Menu Track List Play From Mode MenuPlaylist Menu Play ListNew OpenSave EditExitnext Delete ITEM?Insert Item Clip Info HDDHDD Bypass Internal HDDDelete List Record Format Menu Setup MenuSET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Set Date & TimeOS Upgrade OS Version #Ntsc PAL Exit Upgrade System Firmware Exit YESUpgrade will Erase Current CONTINUE? Exit YES RS422 RemoteComposite Video Component SDI Exitsel TC ModeAudio Input Audio In LevelsDROP/NON Drop Exit SELTC Set TC Delay FS-2E only On Screen DisplayFF/RW Hi Res GPI Port BacklightStop Output Folder Pref Audio CorrectPreferences Analog OutNetwork Setup Dhcp Disabled Not Connected Next USERFS2 Paswdfocus Exit Save NextFTP Telnet WEB Exitsel Video Out Adj Utilities MenuRef Video Compnt LevelOrganize Clip Organize PinnOrganize Organize Keep CLIPS? Exit YES noDelete Clip Format DiskPartition Repair Factory ResetDiagnostic File NameUsing the FS-2/2E Using the FS-2/2EHow to Make a Recording How to PlaybackHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Dismounting FireWire Disk Drives Macintosh Creating a PlaylistHow to Mark Scenes Disk Connecting the FS-2/2E to a NetworkCounter Menu Disp ShftTechnical Specifications ReferenceComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out Headphone Output 1 x 1/4 TRS jack w/ level control Balanced OutputsSNR RPMShuttle Speed Parameters Supported RS422 CommandsFS-2/2E LCD Display Modes Jog Speed ParametersCustom Commands AutoCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents