FOCUS Enhancements FS-2/2E manual Network Setup

Page 48

FS-2/2E FUNCTIONS

BETACAM, or MII output levels. Refer to Chapter 4 for more information.

The selected mode becomes highlighted after you select Exit.

Network Setup

With NETWORK SETUP, you can connect the FS-2/2E to a network. When this is done, you can do FTP file transfers to or from the FS-2/2E or control the FS-2/2E using Telnet. The FS-2E, or FS-2, with the 2.0 software upgrade also allows you to control using your internet browser. The NETWORK SETTINGS MENU contains the following:

IP SETTINGS USER/PASSWORD VIEW IP INFO SERVICES

FOCUS Enhancements is in no way liable for device security (Telnet and FTP). Contact your system administrator regarding the best security practices.

IP SETTINGS

DHCP

CUSTOM IP

EXITSEL

With the IP settings menu item, you can select either DHCP (the network provides the IP address) or a CUSTOM IP.

If you select DHCP and then EXIT, the FS-2/2E attempts to log onto the network.

If you select CUSTOM IP, a submenu opens to ask you to enter an IP number, Sub Net Mask, and Gateway.

IP ADDRESS

000.000.000.000

SUBNET MASK

255.255.255.255

GWY

000.000.000.000

EXIT

 

NEXT

SEL

If you do not have these values, contact your system administrator. The default values for the IP address is 000.000.000.000, Sub Net Mask 255.255.255.000 and Gateway 000.000.000.000.

To modify the custom IP values use the following steps:

STEP 1:

Select the item to modify.

STEP 2:

Press

to select the field to change.

STEP 3:

Use the

to increase the value (HINT:

 

press the SHIFT key on the FS-2/2E

 

front panel plus

to decrease a

 

value).

 

 

Values wrap back to zero once the maximum value has been entered.

STEP 4: To modify the next item or set of values, press the NEXT key on the FS-2/2E front panel.

STEP 5: Once complete, press the SEL key when EXIT is highlighted to exit or the NEXT key to continue to modify items.

Once you exit the menu, the FS-2/2E attempts to log into the network and one of two things happen:

If the FS-2/2E successfully logs onto a network, it displays NETWORK CONNECT SUCCEEDED.

If the FS-2/2E is unable to log onto a network, it displays “NET CONNECT FAILED. CHECK NETWORK CABLE”.

Press the VERIFY button on the FS-2/2E to take you back to the IP Settings menu to verify your values.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 27

Part Number: MANL-0927-03

Page 47 Page 49
Image 48
Page 47 Page 49
Contents FS-2/2E Studio DTE ReleaseContacting Focus Enhancements Office Hours Telephone Fax AddressImportant Safety Instructions Information to UserGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents Using the FS-2/2E PAL/NTSCTable of Contents Reference What is a DTE Disk What is the FireStoreRecorder? FS-2/2E?Package Contents Basic ApplicationsReceiving, Unpacking, and Inspecting Installation Site Requirements Mounting in a 19 Electronics RackInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Setting the Time and Date Formatting the DriveReplacing the Power Module Fuse ForwardEdit/Utility/Input Buttons Edit Function KeysUtility Function Keys Input Source Selection KeysLCD Menu Soft Keys Transport Control KeysWelcome To FIRESTORE2-E Please Wait LCD DisplayForward Search Key No Disk Detected MenuVolume Number Play/Record Status SymbolTimecode/User Bit Display Mode Record/Play Status IndicatorCurrent Disk Volume Available Space on VolumeTimecode or User Bit Value Folder DisplayFS-2/2E Menus and Functions Audio in Levels TC Mode DISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC SnapshotCOMPOSITE, Component Network Setup USER/PASSWORD View IP InfoMenu Items Sub-Menu AvailableSoft Keys Record MenuRetro Cache Loop Record StillControl Mode Menu Time LapseLocal RemoteAV/C Play Mode Menu Play From Mode Menu Playlist MenuTrack List Play ListOpen SaveNew EditDelete ITEM? Insert ItemExitnext Clip Info HDDHDD Bypass Internal HDDDelete List Setup Menu SET DATE&TIME OS Version # OS Upgrade PAL/NTSC ExitselRecord Format Menu Set Date & TimeOS Upgrade OS Version #Upgrade System Firmware Exit YES Upgrade will Erase Current CONTINUE? Exit YESNtsc PAL Exit RS422 RemoteTC Mode Audio InputComposite Video Component SDI Exitsel Audio In LevelsDROP/NON Drop Exit SELTC Set TC Delay FS-2E only On Screen DisplayFF/RW Hi Res GPI Port BacklightStop Output Audio Correct PreferencesFolder Pref Analog OutNetwork Setup Dhcp Disabled Not Connected Next USERFS2 Paswdfocus Exit Save NextFTP Telnet WEB Exitsel Utilities Menu Ref VideoVideo Out Adj Compnt LevelOrganize Pinn OrganizeOrganize Clip Organize Keep CLIPS? Exit YES noDelete Clip Format DiskPartition Factory Reset DiagnosticRepair File NameUsing the FS-2/2E Using the FS-2/2EHow to Make a Recording How to PlaybackHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Dismounting FireWire Disk Drives Macintosh Creating a PlaylistHow to Mark Scenes Connecting the FS-2/2E to a Network CounterDisk Menu Disp ShftTechnical Specifications ReferenceComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out Balanced Outputs SNRHeadphone Output 1 x 1/4 TRS jack w/ level control RPMSupported RS422 Commands FS-2/2E LCD Display ModesShuttle Speed Parameters Jog Speed ParametersCustom Commands AutoCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents