FOCUS Enhancements FS-2/2E manual Technical Specifications, Reference

Page 62

Reference

CHAPTER 4

REFERENCE

This chapter contains reference information for the FS-2/2E as follows:

Technical Specifications FS-2/2E LCD Display Modes Supported RS422 Commands Shuttle Speed Parameters Jog Speed Parameters Custom Commands

Technical Specifications

Input/Outputs

Component - Y, Pr, Pb (3 x BNC in, 3 x BNC out)

if Component SMPTE:

100% white at 700mv with 300mv Sync

700mv Chroma levels (100% color bars)

Setup default to OFF

Chroma offset default to OFF

If Component Betacam

100% white is at 714mv with 286mv Sync

4/3 Chroma boost to 934mv p to p

Setup default to ON

If Component MII:

100% white is at 700mv with 300mv Sync

Black to White range is restricted to 647mv (700-setup)

Setup is ON

Sync (1 x BNC in, 1 x BNC out) Composite (1 x BNC in, 1 x BNC out) Monitor Video Out - Composite (1 x BNC) General Composite Specifications

Differential Phase

2 Degree maximum

Differential Gain

2% maximum

Hue Accuracy

1 Degree

Signal/Noise Ratio

Greater than 54 dB

Bandwidth

5.5 MHz

K Factor % @ 2T

1 % maximum

Y/C Delay

Less than 25 nS

Subcarrier locking range

100Hz

Subcarrier free-run frequency +/- 30 Hz (NTSC or

 

PAL Fsc deviation

Genlock Horizontal

 

adjustment range

+ 4 uS

Residual Subcarrier

Less than 0.5 IRE

SC Phase

Less than 2 degrees

S-Video - Y/C (1 x 4-pin DIN in, 1 x 4-pin DIN out) Levels Adjustments

Video Gain

- +/- 20% 2mv resolution

Chroma Gain

- +/- 20% 2mv resolution

Setup

ON adds 7.5 IRE, or 53mv to

 

luminance channel

 

OFF no change to luminance

 

channel

Serial Digital - SD-SDI (1 x BNC in, 1 x BNC out) - conforms to the SMPTE 259M standard

The FS-2E outputs embedded audio in the SDI output stream. This feature is only available for the FS-2E.

Timecode (1 x BNC in, 1 x BNC out)

Balanced Audio (2 x XLR in, 2 x XLR out) Stereo Audio Monitor (1 x 1/4” TRS jack)

General Audio Specifications

Balanced Inputs

 

Input Impedance

600 Ohms +/-10

Ohms

 

Quantization

16 bits 48Khz

Common mode rejection @1 KHz (dB)100 dB

Analog Input adjustment range -34dB to +4.5dB (in 1.5dB steps, default setting 0dB)

Amplitude with no clipping

3.5Vp-p

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

4 - 1

Part Number: MANL-0927-03

Image 62
Contents FS-2/2E Studio DTE ReleaseContacting Focus Enhancements Office Hours Telephone Fax AddressImportant Safety Instructions Information to UserGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents Using the FS-2/2E PAL/NTSCTable of Contents Reference Recorder? What is a DTE DiskWhat is the FireStore FS-2/2E?Receiving, Unpacking, and Inspecting Package ContentsBasic Applications Inserting the Internal 3.5 IDE Drive Installation Site RequirementsMounting in a 19 Electronics Rack Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Setting the Time and Date Formatting the DriveReplacing the Power Module Fuse ForwardEdit/Utility/Input Buttons Edit Function KeysUtility Function Keys Input Source Selection KeysLCD Menu Soft Keys Transport Control KeysForward Search Key Welcome To FIRESTORE2-E Please WaitLCD Display No Disk Detected MenuTimecode/User Bit Display Mode Volume NumberPlay/Record Status Symbol Record/Play Status IndicatorTimecode or User Bit Value Current Disk VolumeAvailable Space on Volume Folder DisplayFS-2/2E Menus and Functions COMPOSITE, Component Network Setup Audio in Levels TC ModeDISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot USER/PASSWORD View IP InfoSoft Keys Menu ItemsSub-Menu Available Record MenuRetro Cache Loop Record StillLocal Control Mode MenuTime Lapse RemoteAV/C Play Mode Menu Track List Play From Mode MenuPlaylist Menu Play ListNew OpenSave EditExitnext Delete ITEM?Insert Item Clip Info HDDDelete List HDD BypassInternal HDD Record Format Menu Setup MenuSET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Set Date & TimeOS Upgrade OS Version #Ntsc PAL Exit Upgrade System Firmware Exit YESUpgrade will Erase Current CONTINUE? Exit YES RS422 RemoteComposite Video Component SDI Exitsel TC ModeAudio Input Audio In LevelsTC Set DROP/NON DropExit SEL FF/RW Hi Res TC Delay FS-2E onlyOn Screen Display Stop Output GPI PortBacklight Folder Pref Audio CorrectPreferences Analog OutNetwork Setup FTP Telnet WEB Exitsel Dhcp Disabled Not Connected NextUSERFS2 Paswdfocus Exit Save Next Video Out Adj Utilities MenuRef Video Compnt LevelOrganize Clip Organize PinnOrganize Organize Keep CLIPS? Exit YES noPartition Delete ClipFormat Disk Repair Factory ResetDiagnostic File NameUsing the FS-2/2E Using the FS-2/2EHow to Put Recorded Clips on a Computer System How to Make a RecordingHow to Playback Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Dismounting FireWire Disk Drives Macintosh Creating a PlaylistHow to Mark Scenes Disk Connecting the FS-2/2E to a NetworkCounter Menu Disp ShftComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out Technical SpecificationsReference Headphone Output 1 x 1/4 TRS jack w/ level control Balanced OutputsSNR RPMShuttle Speed Parameters Supported RS422 CommandsFS-2/2E LCD Display Modes Jog Speed ParametersCustom Commands AutoCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.