FOCUS Enhancements FS-2/2E manual TC Delay FS-2E only, On Screen Display, FF/RW Hi Res

Page 45

FS-2/2E FUNCTIONS

Press EXIT to return to the menu screen.

NOTE: You cannot set UB values after selecting EXT TC mode in the TC MODE menu.

UB PRESET

F:00:00:00:00

&

MOVES CURSOR

EXIT

For DROP and NON-DROP, select the mode. The highlighted mode is the current mode after exit.

Press EXIT to return to the menu screen.

DROP

NON-DROP

EXIT

This selection is not applicable for PAL use. On the FS-2/2E display, DROP is identified by a semicolon

(;) and NON-DROP by a colon (:).

TC Delay (FS-2E only)

The TC DELAY menu is only available for the FS-2E, or FS-2 (with the 2.0 upgrade). This menu allows you to delay the recorded timecode up to 29 frames.

TC DELAY: 00

Use (middle soft key) and (right soft key) to adjust the delay value. Press EXIT when done.

On Screen Display

This selection allows you to turn on or off the on- screen display on FS-2/2E's Monitor Output. The highlighted item is saved after exit.

When you select ABS, the absolute timecode value, or amount of time recorded to the disk, appears on the bottom center of the monitor output.

When you select TC, the TC (Counter) timecode value appears on the bottom center of the monitor output.

When you select MENU, the FS-2/2E Menu appears in the top left corner of the monitor output.

ABS

TC

MENU

OFF

EXIT

Press

and

to scroll though the

selections.

 

Press EXIT to return to the menu screen.

NOTE: By repeatedly pressing the front panel OSD key, you can cycle between these modes.

FF/RW Hi Res

This screen enables or disables the FS-2/2E forward and reverse search high resolution mode. When enabled the following search speeds are available:

REVERSE: -30X, -25X, -18X, -15X, - 12X, -10X, -8X, -5X, -4X, -3X, -2X, -1/30, -1/15, -1/10, -1/6, -1/5, -1/3,-1/2

FORWARD: +30X, +25X, +18X, +15X, +12X, +10X, +8X, +5X, +4X, +3X, +2X, +1/30, +1/15, +1/10, +1/6, +1/5, +1/3, +1/2

The highlighted mode is the current mode after exit.

Press EXIT to return to the menu screen.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 24

Part Number: MANL-0927-03

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Release FS-2/2E Studio DTETelephone Fax Address Contacting Focus Enhancements Office HoursInformation to User Important Safety InstructionsGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents PAL/NTSC Using the FS-2/2ETable of Contents Reference What is the FireStore What is a DTE DiskRecorder? FS-2/2E?Package Contents Basic ApplicationsReceiving, Unpacking, and Inspecting Installation Site Requirements Mounting in a 19 Electronics RackInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Formatting the Drive Setting the Time and DateForward Replacing the Power Module FuseEdit Function Keys Edit/Utility/Input ButtonsInput Source Selection Keys Utility Function KeysTransport Control Keys LCD Menu Soft KeysLCD Display Welcome To FIRESTORE2-E Please WaitForward Search Key No Disk Detected MenuPlay/Record Status Symbol Volume NumberTimecode/User Bit Display Mode Record/Play Status IndicatorAvailable Space on Volume Current Disk VolumeTimecode or User Bit Value Folder DisplayFS-2/2E Menus and Functions DISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot Audio in Levels TC ModeCOMPOSITE, Component Network Setup USER/PASSWORD View IP InfoSub-Menu Available Menu ItemsSoft Keys Record MenuRetro Cache Still Loop RecordTime Lapse Control Mode MenuLocal RemoteAV/C Play Mode Menu Playlist Menu Play From Mode MenuTrack List Play ListSave OpenNew EditInsert Item Delete ITEM?Exitnext Clip Info HDDHDD Bypass Internal HDDDelete List SET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Setup MenuRecord Format Menu Set Date & TimeOS Version # OS UpgradeUpgrade will Erase Current CONTINUE? Exit YES Upgrade System Firmware Exit YESNtsc PAL Exit RS422 RemoteAudio Input TC ModeComposite Video Component SDI Exitsel Audio In LevelsDROP/NON Drop Exit SELTC Set TC Delay FS-2E only On Screen DisplayFF/RW Hi Res GPI Port BacklightStop Output Preferences Audio CorrectFolder Pref Analog OutNetwork Setup Dhcp Disabled Not Connected Next USERFS2 Paswdfocus Exit Save NextFTP Telnet WEB Exitsel Ref Video Utilities MenuVideo Out Adj Compnt LevelOrganize Organize PinnOrganize Clip Organize Keep CLIPS? Exit YES noDelete Clip Format DiskPartition Diagnostic Factory ResetRepair File NameUsing the FS-2/2E Using the FS-2/2EHow to Make a Recording How to PlaybackHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Creating a Playlist Dismounting FireWire Disk Drives MacintoshHow to Mark Scenes Counter Connecting the FS-2/2E to a NetworkDisk Menu Disp ShftTechnical Specifications ReferenceComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out SNR Balanced OutputsHeadphone Output 1 x 1/4 TRS jack w/ level control RPMFS-2/2E LCD Display Modes Supported RS422 CommandsShuttle Speed Parameters Jog Speed ParametersAuto Custom CommandsCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents