FOCUS Enhancements FS-2/2E manual Creating a Playlist, Dismounting FireWire Disk Drives Macintosh

Page 59

Using the FS-2/2E

When mounted, your FireWire disk drive should appear on the computer's desktop as shown below:

The FireStore formatted disk drive appears as a FAT32 volume with a PC label.

NOTE: This is not always the case on Version 10 of the Macintosh operating system however.

STEP 3: Once you have located your FireWire disk drive on the desktop, double click the disk icon to open it up. Once opened, you will see the following:

Dismounting FireWire Disk Drives (Macintosh)

Once you have completed working with your disk drive on a Macintosh computer system, you must dismount the drive before unplugging it.

Do this as follows:

STEP 1: Select the disk drive on the computer's desktop. It is marked with a PC symbol.

STEP 2: Drag the drive into the trash. This dismounts the particular disk drive.

Creating a Playlist

Use the following procedure to create a simple playlist on the FS-2/2E.

STEP 1: Ensure no playlist is open.

STEP 2: TO ADD A CLIP - Play a clip you wish to add to the playlist. Using the front panel buttons, press MARK IN and MARK OUT for the particular portion of the clip to add to the playlist. Both buttons will light.

STEP 3: Once marked, press the front panel PLAYLIST button. The MARK IN and MARK OUT key lights will go out.

STEP 4: Navigate to the next clip and again mark in and out points followed by pressing PLAYLIST.

STEP 5: Repeat steps 2 and 3 to add all desired clips.

STEP 6: Once you have selected all the clips you wish to add to the playlist, stop playback and navigate to the PLAYLIST menu on the FS-2/2E.

STEP 7: Select SAVE and name the playlist. (It is also possible to modify your created playlist using the PLAYLIST-> EDIT menu.

STEP 8: To playback the playlist, navigate to PLAY-FROM in the FS-2/2E menu and select PLAYLISTS. Select the desired playlist and then exit. The PLAYLIST button on the front panel will light.

All playback now comes only from the created playlist.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

3 - 6

Part Number: MANL-0927-03

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Release FS-2/2E Studio DTETelephone Fax Address Contacting Focus Enhancements Office HoursInformation to User Important Safety InstructionsGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents PAL/NTSC Using the FS-2/2ETable of Contents Reference FS-2/2E? What is a DTE DiskWhat is the FireStore Recorder?Receiving, Unpacking, and Inspecting Package ContentsBasic Applications Inserting the Internal 3.5 IDE Drive Installation Site RequirementsMounting in a 19 Electronics Rack Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Formatting the Drive Setting the Time and DateForward Replacing the Power Module FuseEdit Function Keys Edit/Utility/Input ButtonsInput Source Selection Keys Utility Function KeysTransport Control Keys LCD Menu Soft KeysNo Disk Detected Menu Welcome To FIRESTORE2-E Please WaitLCD Display Forward Search KeyRecord/Play Status Indicator Volume NumberPlay/Record Status Symbol Timecode/User Bit Display ModeFolder Display Current Disk VolumeAvailable Space on Volume Timecode or User Bit ValueFS-2/2E Menus and Functions USER/PASSWORD View IP Info Audio in Levels TC ModeDISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot COMPOSITE, Component Network SetupRecord Menu Menu ItemsSub-Menu Available Soft KeysRetro Cache Still Loop RecordRemote Control Mode MenuTime Lapse LocalAV/C Play Mode Menu Play List Play From Mode MenuPlaylist Menu Track ListEdit OpenSave NewClip Info HDD Delete ITEM?Insert Item ExitnextDelete List HDD BypassInternal HDD Set Date & Time Setup MenuSET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Record Format MenuOS Version # OS UpgradeRS422 Remote Upgrade System Firmware Exit YESUpgrade will Erase Current CONTINUE? Exit YES Ntsc PAL ExitAudio In Levels TC ModeAudio Input Composite Video Component SDI ExitselTC Set DROP/NON DropExit SEL FF/RW Hi Res TC Delay FS-2E onlyOn Screen Display Stop Output GPI PortBacklight Analog Out Audio CorrectPreferences Folder PrefNetwork Setup FTP Telnet WEB Exitsel Dhcp Disabled Not Connected NextUSERFS2 Paswdfocus Exit Save Next Compnt Level Utilities MenuRef Video Video Out AdjOrganize Keep CLIPS? Exit YES no Organize PinnOrganize Organize ClipPartition Delete ClipFormat Disk File Name Factory ResetDiagnostic RepairUsing the FS-2/2E Using the FS-2/2EHow to Put Recorded Clips on a Computer System How to Make a RecordingHow to Playback Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Creating a Playlist Dismounting FireWire Disk Drives MacintoshHow to Mark Scenes Menu Disp Shft Connecting the FS-2/2E to a NetworkCounter DiskComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out Technical SpecificationsReference RPM Balanced OutputsSNR Headphone Output 1 x 1/4 TRS jack w/ level controlJog Speed Parameters Supported RS422 CommandsFS-2/2E LCD Display Modes Shuttle Speed ParametersAuto Custom CommandsCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents