FOCUS Enhancements FS-2/2E manual Av/C

Page 34

FS-2/2E FUNCTIONS

The FS-2/2E has a menu item that allows the FS-2/2E to appear to external controllers as a Sony BVW-75 BetaSP VTR when in Remote RS422 mode. It also has a generic RS422 mode.

In remote, you can also slave an FS-2/2E to another device (such as a Betacam or other non-DV deck) using the RS422 port.

NOTE: Not all controllable functions of a BVW-75 are available on the FS-2/2E. This mode is only for greater compatibility with existing control systems. (Refer to “Supported RS422 Commands” on page 4-3 for a listing of RS422 supported commands.

AV/C

Use these settings in PLAYBACK and other situations where the FS-2/2E is controlled by an external FireWire device (such as a DV NLE system).

There three options in this sub-menu:

Normal Mode - This is the default setting. In this mode, recordings are

captured to a single base file until STOP is triggered, or the nine minute file size limit is reached.

Index at TC - In this mode, recordings are continuous until a break in the incoming timecode stream is detected. At that time, a new file is automatically created. No frames are lost during the transition to a new clip.

Index at Scene - In this mode, recordings are continuous until a scene break is detected in the incoming video stream. At that time, a new file is automatically created within one second of the scene change. No frames are lost during the transition to a new clip. Refer to the note under Local mode regarding index markers.

NOTE: AV/C does not function completely with all NLE systems. Contact Focus Enhancements technical support for more information.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 13

Part Number: MANL-0927-03

Page 33 Page 35
Image 34
Page 33 Page 35
Contents FS-2/2E Studio DTE ReleaseContacting Focus Enhancements Office Hours Telephone Fax AddressImportant Safety Instructions Information to UserGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents Using the FS-2/2E PAL/NTSCTable of Contents Reference Recorder? What is a DTE DiskWhat is the FireStore FS-2/2E?Basic Applications Package ContentsReceiving, Unpacking, and Inspecting Mounting in a 19 Electronics Rack Installation Site RequirementsInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Setting the Time and Date Formatting the DriveReplacing the Power Module Fuse ForwardEdit/Utility/Input Buttons Edit Function KeysUtility Function Keys Input Source Selection KeysLCD Menu Soft Keys Transport Control KeysForward Search Key Welcome To FIRESTORE2-E Please WaitLCD Display No Disk Detected MenuTimecode/User Bit Display Mode Volume NumberPlay/Record Status Symbol Record/Play Status IndicatorTimecode or User Bit Value Current Disk VolumeAvailable Space on Volume Folder DisplayFS-2/2E Menus and Functions COMPOSITE, Component Network Setup Audio in Levels TC ModeDISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot USER/PASSWORD View IP InfoSoft Keys Menu ItemsSub-Menu Available Record MenuRetro Cache Loop Record StillLocal Control Mode MenuTime Lapse RemoteAV/C Play Mode Menu Track List Play From Mode MenuPlaylist Menu Play ListNew OpenSave EditExitnext Delete ITEM?Insert Item Clip Info HDDInternal HDD HDD BypassDelete List Record Format Menu Setup MenuSET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Set Date & TimeOS Upgrade OS Version #Ntsc PAL Exit Upgrade System Firmware Exit YESUpgrade will Erase Current CONTINUE? Exit YES RS422 RemoteComposite Video Component SDI Exitsel TC ModeAudio Input Audio In LevelsExit SEL DROP/NON DropTC Set On Screen Display TC Delay FS-2E onlyFF/RW Hi Res Backlight GPI PortStop Output Folder Pref Audio CorrectPreferences Analog OutNetwork Setup USERFS2 Paswdfocus Exit Save Next Dhcp Disabled Not Connected NextFTP Telnet WEB Exitsel Video Out Adj Utilities MenuRef Video Compnt LevelOrganize Clip Organize PinnOrganize Organize Keep CLIPS? Exit YES noFormat Disk Delete ClipPartition Repair Factory ResetDiagnostic File NameUsing the FS-2/2E Using the FS-2/2EHow to Playback How to Make a RecordingHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Dismounting FireWire Disk Drives Macintosh Creating a PlaylistHow to Mark Scenes Disk Connecting the FS-2/2E to a NetworkCounter Menu Disp ShftReference Technical SpecificationsComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out Headphone Output 1 x 1/4 TRS jack w/ level control Balanced OutputsSNR RPMShuttle Speed Parameters Supported RS422 CommandsFS-2/2E LCD Display Modes Jog Speed ParametersCustom Commands AutoCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents