FOCUS Enhancements FS-2/2E LCD Display, Forward Search Key, Welcome To FIRESTORE2-E Please Wait

Page 25

FS-2/2E FUNCTIONS

the button is released. The SHIFT mode of particular keys is listed below that key or displayed on the FS-2/2E LCD.

Back Search Key

Press the Back Search button to allow video to be played at different speeds (both slower and faster than real-time). Refer to the note under “Forward Search Key” for more information.

Forward Search Key

Press the Forward Search button to play video at different speeds (both slower and faster than real- time).

NOTE: Pressing the FF Search button multiple times results in increases in the search speed. This mode is bidirectional in forward X times normal search speed. Press the Back Search button to cause the FF speed to slow down by one step.

For instance, if you are in 10X FF speed and you press the Back Search button once, you are in 2X

FFmode. This also applies to backward search speeds. The default speed resolution is as follows (NTSC and PAL have slightly different multiples for both greater and less than 1X play speed):

REVERSE: -30X, -10X, -2X, -1X (reverse play), -1/2X(-15fps), Still.

FORWARD: Still, +1/2X (+15fps), +1X (play), +2X, +10X, +30X

Standard Forward Search and Reverse Search also have a “higher resolution” mode where more speeds are available as follows:

REVERSE: -30X, -25X, -18X, -15X, - 12X, -10X, -8X, -5X, -4X, -3X, -2X, -1/30, -1/15, -1/10, -1/6, -1/5, -1/3,-1/2

FORWARD: +30X, +25X, +18X, +15X, +12X, +10X, +8X, +5X, +4X, +3X, +2X, +1/30, +1/15, +1/10, +1/6, +1/5, +1/3, +1/2

This mode can be set in the SETUP->FF / RW HI RES menu in the FS-2/2E Setup Menu. Once set, these speed resolutions become the default when you press Fast Backward or Fast Forward.

LCD Display

The FS-2/2E LCD screen displays different FS-2/2E modes and states. On boot up, the FS-2/2E displays the following screen:

WELCOME

TO FIRESTORE2-E!

PLEASE WAIT....

Depending on the connected disk drive, the FS-2/2E may or may not display “Please Wait” during boot up.

Once booted, if no disk drive is connected to the FS-2/2E (either through the internal slot or externally using the HDD I/O port), the following screen appears:

NO DISK

DETECTED!

MENU

Insert a drive into the front panel drive bay or connect a FireWire disk drive to the HDD I/O port.

If you received a drive from Focus Enhancements, it should be configured and ready to use. If the message “No Disk Detected” appears, make sure the drive is inserted properly.

If the message “No Format Detected” appears, you must partition and format the inserted drive before use. The FS-2/2E prompts you through the steps required to perform a format.

WARNING: Formatting and partitioning erases all data on a disk!

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 4

Part Number: MANL-0927-03

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Release FS-2/2E Studio DTETelephone Fax Address Contacting Focus Enhancements Office HoursInformation to User Important Safety InstructionsGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents PAL/NTSC Using the FS-2/2ETable of Contents Reference What is the FireStore What is a DTE DiskRecorder? FS-2/2E?Basic Applications Package ContentsReceiving, Unpacking, and Inspecting Mounting in a 19 Electronics Rack Installation Site RequirementsInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Formatting the Drive Setting the Time and DateForward Replacing the Power Module FuseEdit Function Keys Edit/Utility/Input ButtonsInput Source Selection Keys Utility Function KeysTransport Control Keys LCD Menu Soft KeysLCD Display Welcome To FIRESTORE2-E Please WaitForward Search Key No Disk Detected MenuPlay/Record Status Symbol Volume NumberTimecode/User Bit Display Mode Record/Play Status IndicatorAvailable Space on Volume Current Disk VolumeTimecode or User Bit Value Folder DisplayFS-2/2E Menus and Functions DISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot Audio in Levels TC ModeCOMPOSITE, Component Network Setup USER/PASSWORD View IP InfoSub-Menu Available Menu ItemsSoft Keys Record MenuRetro Cache Still Loop RecordTime Lapse Control Mode MenuLocal RemoteAV/C Play Mode Menu Playlist Menu Play From Mode MenuTrack List Play ListSave OpenNew EditInsert Item Delete ITEM?Exitnext Clip Info HDDInternal HDD HDD BypassDelete List SET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Setup MenuRecord Format Menu Set Date & TimeOS Version # OS UpgradeUpgrade will Erase Current CONTINUE? Exit YES Upgrade System Firmware Exit YESNtsc PAL Exit RS422 RemoteAudio Input TC ModeComposite Video Component SDI Exitsel Audio In LevelsExit SEL DROP/NON DropTC Set On Screen Display TC Delay FS-2E onlyFF/RW Hi Res Backlight GPI PortStop Output Preferences Audio CorrectFolder Pref Analog OutNetwork Setup USERFS2 Paswdfocus Exit Save Next Dhcp Disabled Not Connected NextFTP Telnet WEB Exitsel Ref Video Utilities MenuVideo Out Adj Compnt LevelOrganize Organize PinnOrganize Clip Organize Keep CLIPS? Exit YES noFormat Disk Delete ClipPartition Diagnostic Factory ResetRepair File NameUsing the FS-2/2E Using the FS-2/2EHow to Playback How to Make a RecordingHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Creating a Playlist Dismounting FireWire Disk Drives MacintoshHow to Mark Scenes Counter Connecting the FS-2/2E to a NetworkDisk Menu Disp ShftReference Technical SpecificationsComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out SNR Balanced OutputsHeadphone Output 1 x 1/4 TRS jack w/ level control RPMFS-2/2E LCD Display Modes Supported RS422 CommandsShuttle Speed Parameters Jog Speed ParametersAuto Custom CommandsCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents