FOCUS Enhancements FS-2/2E manual Mounting FireWire Disk Drives Macintosh

Page 58

Using the FS-2/2E

STEP 6: Locate and select the external FireWire drive under Media Drive(s).

NOTE: If the drive does not appear, check to make sure you have created the OMFI MediaFiles folder correctly with proper case and spacing. Also, check to see that the drive is properly connected and recognized by the com- puter). Under Project(s), select All Projects (This highlights all items in the Project(s) window).

STEP 7: Ensure Master Clips is checked and press OK. The following Media Tools Window appears:

STEP 8: Create a new bin (select File -> New Bin) or open an existing bin in Avid.

STEP 9: Once opened, select all items in the Media Tools window (select Edit> Select All).

STEP 10: Drag the contents of the Media Tools Window into the bin. You can nos use these clips in the Avid timeline.

Dismounting FireWire Disk Drives (Windows XP, 2000, 98SE and ME)

Once you have completed working with your disk drive on a Windows XP, Windows 2000, Windows 98SE or Windows ME computer system, you must dismount the drive before unplugging it.

To do this, use the following procedure:

STEP 1: Click the Safely Remove Hardware icon at the bottom right side of the Windows task bar as shown below.

SAFELY REMOVE

HARDWARE

ICON

STEP 2: The computer system prompts you to “remove” the connected FireWire disk drive. This begins the dismount process.

STEP 3: Select the message by clicking on it. The computer dismounts the disk drive and notify you when it is safe to remove the volume.

Mounting FireWire Disk Drives (Macintosh)

NOTE: Even if your FireWire disk drive was bought for use on a Macintosh, you MUST first partition and format the drive as a FAT32 volume on the FS-2/2E for it to work.

STEP 1: On a Macintosh, start your computer and connect your FireWire disk drive to the computer utilizing a standard 6-pin to 6-pin FireWire cable.

Consult your FireWire disk drive docu- mentation for more information.

STEP 2: Ensure the required FireWire disk drive drivers have also been loaded onto you computer system (consult your FireWire disk drive's documentation for more information).

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

3 - 5

Part Number: MANL-0927-03

Page 57 Page 59
Image 58
Page 57 Page 59
Contents FS-2/2E Studio DTE ReleaseContacting Focus Enhancements Office Hours Telephone Fax AddressImportant Safety Instructions Information to UserGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents Using the FS-2/2E PAL/NTSCTable of Contents Reference Recorder? What is a DTE DiskWhat is the FireStore FS-2/2E?Basic Applications Package ContentsReceiving, Unpacking, and Inspecting Mounting in a 19 Electronics Rack Installation Site RequirementsInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Setting the Time and Date Formatting the DriveReplacing the Power Module Fuse ForwardEdit/Utility/Input Buttons Edit Function KeysUtility Function Keys Input Source Selection KeysLCD Menu Soft Keys Transport Control KeysForward Search Key Welcome To FIRESTORE2-E Please WaitLCD Display No Disk Detected MenuTimecode/User Bit Display Mode Volume NumberPlay/Record Status Symbol Record/Play Status IndicatorTimecode or User Bit Value Current Disk VolumeAvailable Space on Volume Folder DisplayFS-2/2E Menus and Functions COMPOSITE, Component Network Setup Audio in Levels TC ModeDISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot USER/PASSWORD View IP InfoSoft Keys Menu ItemsSub-Menu Available Record MenuRetro Cache Loop Record StillLocal Control Mode MenuTime Lapse RemoteAV/C Play Mode Menu Track List Play From Mode MenuPlaylist Menu Play ListNew OpenSave EditExitnext Delete ITEM?Insert Item Clip Info HDDInternal HDD HDD BypassDelete List Record Format Menu Setup MenuSET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Set Date & TimeOS Upgrade OS Version #Ntsc PAL Exit Upgrade System Firmware Exit YESUpgrade will Erase Current CONTINUE? Exit YES RS422 RemoteComposite Video Component SDI Exitsel TC ModeAudio Input Audio In LevelsExit SEL DROP/NON DropTC Set On Screen Display TC Delay FS-2E onlyFF/RW Hi Res Backlight GPI PortStop Output Folder Pref Audio CorrectPreferences Analog OutNetwork Setup USERFS2 Paswdfocus Exit Save Next Dhcp Disabled Not Connected NextFTP Telnet WEB Exitsel Video Out Adj Utilities MenuRef Video Compnt LevelOrganize Clip Organize PinnOrganize Organize Keep CLIPS? Exit YES noFormat Disk Delete ClipPartition Repair Factory ResetDiagnostic File NameUsing the FS-2/2E Using the FS-2/2EHow to Playback How to Make a RecordingHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Dismounting FireWire Disk Drives Macintosh Creating a PlaylistHow to Mark Scenes Disk Connecting the FS-2/2E to a NetworkCounter Menu Disp ShftReference Technical SpecificationsComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out Headphone Output 1 x 1/4 TRS jack w/ level control Balanced OutputsSNR RPMShuttle Speed Parameters Supported RS422 CommandsFS-2/2E LCD Display Modes Jog Speed ParametersCustom Commands AutoCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents