How to Make a Recording

Using the FS-2/2E

Use the following procedure to make a recording using the FS-2/2E.

STEP 1: Make sure the FS-2/2E is connected to power and has been turned on using the power switch on the rear of the chassis.

STEP 2: Connect the required devices as explained in Chapter One. For this example, that would include a video source (audio and video), speakers or headset if desired, and a monitor if desired.

STEP 3: Make sure the drive in the FS-2/2E has been formatted. If it is not, the LCD screen indicates that it has not been. Refer to the “Utilities Menu” on page 2- 29.

STEP 4: Manually select the input source using the front panel buttons (that is, CMPST, Y/C, CMPNT, SDI, or DV).

STEP 5: Select the record format as follows:

a.Press the Menu soft key.

b.Select RECORD FORMAT

c.Select the desired format using the soft key to highlight your

selection.

d. Press EXIT twice.

STEP 6: Press the red record button twice. (Pressing this button once places the FS-2/2E in record-pause. Pressing it again starts the recording.) Timecode on the front panel LCD advances when recording begins.

STEP 7: Press STOP when you have finished the recording.

How to Playback

Use the following procedure to playback a recording using the FS-2/2E.

NOTE: In all cases, if a monitor is connected to the video output, it displays the signal going through the FS-2/2E

This procedure assumes that you have already recorded material on the hard drive as explained in the previous section.

STEP 1: Select the desired clip by using the

Forward Index and Back Index buttons. These buttons step you through the clips on the selected disk drive.

STEP 2: If more than one disk drive is connected, press the SHIFT and the Forward Index or Back Index key as required until the desired drive appears on the LCD.

STEP 3: Press the PLAY button once to begin playback.

STEP 4: Press the Stop button once to pause or

twice to stop the playback.

How to Put Recorded Clips on a Computer System

Once you have recorded clips to a FireWire disk drive using FireStore, you can use those clips in most computer based DV NLE systems.

Traditionally, in order to get footage into an NLE system, it was necessary to capture or digitize that footage utilizing a video capture card. Using the FS-2/2E recorded clips, you can skip this capture stage by just connecting a FireWire disk drive to your computer using an OHCI compliant IEEE-1394 (FireWire) PCI card or connect direct from the FS-2/2E using the HDD Bypass mode (refer to “HDD Bypass” on page 2-18 for more information).

You can connect FireWire disk drives used with the FS-2/2E to any computer system that will read a FAT 32 volume. This includes Windows 98SE, Windows ME, Windows 2000, Windows XP and Mac OS9 and OS10.

Check the FOCUS Enhancements' website (www.FOCUSinfo.com) for more information.

In order to use the FS-2/2E recorded FireWire disk drives on a computer, you must have an active IEEE-1394 connection on your computer. You also must have loaded any required FireWire disk drive drivers onto your computer system Consult your FireWire disk drive documentation for more information.

Connect your FireWire disk drive to your computer system utilizing a standard 6-pin to 6-pin FireWire cable and connect power to the drive if necessary.

Consult the FireWire disk drive documentation for more information.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

3 - 2

Part Number: MANL-0927-03

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.