FOCUS Enhancements FS-2/2E USERFS2 Paswdfocus Exit Save Next, Dhcp Disabled Not Connected Next

Page 49

FS-2/2E FUNCTIONS

Press the EXIT button to take you back to the SETUP menu.

USER/PASSWORD

This screen allows you to set a username and password for the FS-2/2E. If you are unsure what username and password to use, contact your system administrator.

USER:FS2

PASWD:FOCUS

EXIT

SAVE

NEXT

To modify the username and password, use the following steps:

STEP 1:

Select the item to modify and then

 

press the right arrow key to select the

 

field.

 

 

STEP 2:

Use

to increase the value (HINT:

 

press the SHIFT key on the FS-2/2E

 

front

panel plus

to decrease a

 

value).

 

VIEW IP INFO

In cases where DHCP is being used, by selecting VIEW IP INFO, you can see the IP address that the network has provided the FS-2/2E.

IP100.000 001.000

MSK255.000 000.000

DHCP DISABLED

NOT CONNECTED NEXT

If the FS-2/2E is not connected to a network or was not able to successfully log on, this screen displays “DHCP DISABLED NOT CONNECTED”. Check your settings or contact your system administrator for further assistance.

SERVICES

The SERVICES menu allows you to enable or disable any of these services: FTP, TELNET, or WEB connection. With each, it is necessary to enable or disable the function within the submenu.

Values loop back to zero once the maximum value has been entered.

STEP 3: To modify the next item, press the NEXT key on the FS-2/2E front panel. It is only possible to have one username and password per unit. The maximum number of characters for each is seven.

FTP

TELNET

WEB

EXITSEL

Once FTP is enabled you can use your web browser or ftp utility to transfer file to and from the FS-2/2E.

With TELNET enabled, you can send commands to control the FS-2/2E with a telnet utility.

With WEB enabled, you can control the FS-2/2E from your web browser. Type in the FS-2/2E IP address into the address bar of your browser to start using the web interface. Only an FS-2E or FS- 2 (with the 2.0 firmware upgrade) has this option available.

Use the web interface to control, change settings, edit playlists, and even delete tracks on the FS-2/2E.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 28

Part Number: MANL-0927-03

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Release FS-2/2E Studio DTETelephone Fax Address Contacting Focus Enhancements Office HoursInformation to User Important Safety InstructionsGrounding or Polarization Part Number MANL-0927-03 Part Number MANL-0927-03 Part Number MANL-0927-03 Table of Contents Introduction Table of Contents PAL/NTSC Using the FS-2/2ETable of Contents Reference What is the FireStore What is a DTE DiskRecorder? FS-2/2E?Basic Applications Package ContentsReceiving, Unpacking, and Inspecting Mounting in a 19 Electronics Rack Installation Site RequirementsInserting the Internal 3.5 IDE Drive Using External Disk Drives Physical Features Rear Connection Panel Introduction Setting Up the FS-2/2E Formatting the Drive Setting the Time and DateForward Replacing the Power Module FuseEdit Function Keys Edit/Utility/Input ButtonsInput Source Selection Keys Utility Function KeysTransport Control Keys LCD Menu Soft KeysLCD Display Welcome To FIRESTORE2-E Please WaitForward Search Key No Disk Detected MenuPlay/Record Status Symbol Volume NumberTimecode/User Bit Display Mode Record/Play Status IndicatorAvailable Space on Volume Current Disk VolumeTimecode or User Bit Value Folder DisplayFS-2/2E Menus and Functions DISABLE, PAUSE/UNPAUSE, INDEX/NEW FILE, REC Snapshot Audio in Levels TC ModeCOMPOSITE, Component Network Setup USER/PASSWORD View IP InfoSub-Menu Available Menu ItemsSoft Keys Record MenuRetro Cache Still Loop RecordTime Lapse Control Mode MenuLocal RemoteAV/C Play Mode Menu Playlist Menu Play From Mode MenuTrack List Play ListSave OpenNew EditInsert Item Delete ITEM?Exitnext Clip Info HDDInternal HDD HDD BypassDelete List SET DATE&TIME OS Version # OS Upgrade PAL/NTSC Exitsel Setup MenuRecord Format Menu Set Date & TimeOS Version # OS UpgradeUpgrade will Erase Current CONTINUE? Exit YES Upgrade System Firmware Exit YESNtsc PAL Exit RS422 RemoteAudio Input TC ModeComposite Video Component SDI Exitsel Audio In LevelsExit SEL DROP/NON DropTC Set On Screen Display TC Delay FS-2E onlyFF/RW Hi Res Backlight GPI PortStop Output Preferences Audio CorrectFolder Pref Analog OutNetwork Setup USERFS2 Paswdfocus Exit Save Next Dhcp Disabled Not Connected NextFTP Telnet WEB Exitsel Ref Video Utilities MenuVideo Out Adj Compnt LevelOrganize Organize PinnOrganize Clip Organize Keep CLIPS? Exit YES noFormat Disk Delete ClipPartition Diagnostic Factory ResetRepair File NameUsing the FS-2/2E Using the FS-2/2EHow to Playback How to Make a RecordingHow to Put Recorded Clips on a Computer System Mounting FireWire Disk Drives Windows XP, 2000, 98SE and ME Using the FS-2/2E Mounting FireWire Disk Drives Macintosh Creating a Playlist Dismounting FireWire Disk Drives MacintoshHow to Mark Scenes Counter Connecting the FS-2/2E to a NetworkDisk Menu Disp ShftReference Technical SpecificationsComponent Y, Pr, Pb 3 x BNC in, 3 x BNC out SNR Balanced OutputsHeadphone Output 1 x 1/4 TRS jack w/ level control RPMFS-2/2E LCD Display Modes Supported RS422 CommandsShuttle Speed Parameters Jog Speed ParametersAuto Custom CommandsCOMPONENT-SMPTE Reference Index FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide FS-2 and FS-2E Studio DTE Disk Recorders User Guide

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.
Top Page Image Contents