National Instruments FP-1600 quick start Install the FieldPoint Software, Verify the Installation

Page 10

8 Install the FieldPoint Software

A. Close all other applications. If you plan to install National Instruments development software such as Lookout, LabVIEW, or Measurement Studio, install them before you install the FieldPoint software.

B. Insert the FieldPoint software CD and follow the onscreen instructions.

9 Verify the Installation

A. Select Start»Programs»National Instruments FieldPoint»FieldPoint Explorer.

B. Right-click on the FieldPoint icon and select Add a comm resource to this server.

10

Image 10

Contents What You Need to Get Set Up Install the Network ModuleLock rail clip Install the Terminal Bases Place protective cover on last base Install the I/O Modules Connect the Network CablesWire Power to Your FieldPoint System FP-1600 FP-AI-100 FP-AO-200 Connect to Field Devices FP-AI-110Power Up Your FieldPoint System Install the FieldPoint Software Verify the InstallationEthernet as the Type IP address is the address of the FP-1600 on the network Click on Find DevicesSelect File»Save Configure I/O Modules Select File»Save when you are done Where to Go from Here FP-1600 Specifications 11 to 30 VDCMechanical Dimensions Copyright 1999, 2000 National Instruments Corporation