Dell M905 manual PowerEdge M605

Page 9

PowerEdge M605

•One or two AMD Opteron 2000 Series dual-core or quad-core processors.

•A minimum of 1 GB of 677-MHz or 800-MHz DDR2 memory modules, upgradable to a maximum of 64 GB by installing pairs of 512-MB, 1-GB, 2-GB, 4-GB, or 8-GB modules in the eight memory module sockets on the blade system board. The blade also supports memory sparing.

Common Features

•The PowerEdge M805 and M905 blades support one or two 2.5 inch SAS hard drives.

•The PowerEdge M600 and M605 blades support one or two 2.5-inch SATA hard drives, or one or two 2.5 inch SAS hard drives.

NOTE: SAS and SATA hard drives cannot be mixed within a blade.

Hot-plug drive operation is supported if an optional RAID controller card is installed in the blade.

•Three USB 2.0-compliant ports (PowerEdge M805 and M905) or two USB 2.0-compliant ports (PowerEdge M605 and M600) support devices such as a mouse, keyboard, flash drive, diskette drive, or an optical drive.

NOTE: Only Dell-supplied USB devices are supported.

•An integrated VGA-compatible video subsystem with an ATI RN50 video controller. This video subsystem contains 32 MB of SDRAM video memory (nonupgradable). Maximum resolution is 1280 x 1024 x 65,000 colors (noninterlaced).

•An Integrated Dell Remote Access Controller (iDRAC), which provides remote system management, blade-level power management, virtual KVM and virtual media support, remote alerting and event logging.

•Four 1-GB Ethernet ports supported by two integrated dual-port Broadcom 5709S controllers (PowerEdge M805 and M905), or two 1-GB Ethernet ports supported by two integrated Broadcom 5708S controllers (PowerEdge M600 and M605). TCP/IP Offload Engine (TOE) and iSCSI boot are supported.

For a complete list of system features, see "Technical Specifications" on page 15.

Getting Started With Your System

7

Image 9

Contents Getting Started With Your System Page Getting Started With Your System May W001C System Enclosure Features System FeaturesPage Getting Started With Your System Blade Features PowerEdge M605 Supported Operating Systems Other Information You May Need Unpack the System Install the Blades Install the System in a RackConnect the CMC and KVM Modules Connect the System to PowerTurn on the System Turn on the Blades Complete the 0perating System SetupBlade Specifications Technical SpecificationsUSB System Enclosure Specifications Inrush current may reach 55 a per Module Specifications Above 900 m 2955 ft Environmental Maximum shock Operating Getting Started With Your System Guide de mise en route Remarques, avis et précautions Caractéristiques du châssis Caractéristiques du systèmeSécurité des accès utilisateur Guide de mise en route Caractéristiques des lames PowerEdge M600 Guide de mise en route Systèmes dexploitation pris en charge Autres informations utiles Déballage du système Installation du système dans un rackInstallation des lames Branchement du système sur le secteur Connexion du contrôleur CMC et des modules KVMMise sous tension du système Mise sous tension des lames Finalisation de linstallation du système dexploitationSpécifications des lames Spécifications techniquesChaud de 2,5 pouces 5709S à double port Spécifications du châssis Souris Spécifications des modules dE/S Pieds Primeiros passos com o sistema Notas, avisos e advertências Recursos da caixa do sistema Recursos do sistemaPrimeiros passos com o sistema Page Recursos da lâmina Recursos comuns Primeiros passos com o sistema Outras informações úteis Sistemas operacionais admitidosComo obter assistência técnica Instalação e configuração Remoção do sistema da embalagemInstalação do sistema no rack Conecte os módulos CMC e KVM Instale as lâminasConecte o sistema à energia Ligue as lâminas Ligue o sistemaConclua a configuração do sistema operacional Especificações técnicasEspecificações da lâmina Memória continuação Conectores Externos Especificações da caixa do sistema Com USB 2.0 para teclado e mouse Especificações do módulo de E/S De 31 G por até 2,6 ms Primeiros passos com o sistema Procedimientos iniciales con el sistema Notas, avisos y precauciones Características del alojamiento del sistema Características del sistemaCaracterísticas de administración de sistemas Page Características del módulo de alta densidad Uno o dos procesadores Intel Xeon de dos o cuatro núcleos Procedimientos iniciales con el sistema Sistemas operativos admitidos Otra información útil Instalación y configuración Obtención de asistencia técnicaDesembalaje del sistema Instalación de los módulos de alta densidad Instalación del sistema en un rackConexión de los módulos CMC y KVM Encendido del sistema Conexión del sistema a la alimentaciónEncendido de los módulos de alta densidad Finalización de la configuración del sistema operativo Especificaciones técnicasEspecificaciones del módulo de alta densidad De 2,5 pulgadas 5709S integradas de dos puertos Especificaciones del alojamiento del sistema Con USB 2.0 para el teclado y el ratón Módulos opcionales Especificaciones del módulo de E/SPor cada 300 m