3Com CS/2500 manual Front Panel

Front Panel 1-5

	WARNING: Use only a nonconductive object such as a plastic stylus to
	press the hardware interrupt switch. Do not use the tip of a pencil.
	Graphite particles can cause electrical shock to the operator and can
	damage components on the server’s circuit boards.
Cover	The inverted U-shaped cover is secured by two screws on the bottom
	edge of each side of the chassis.
	Both sides of the cover have vents. The vents on the left side (viewed
	from the front of the server) are for air intake. The vents on the right
	side are for air exhaust.
Front Panel	The front panel has six LED indicators and a reset switch. Figure 1-3
	shows the front panel of the CS/2500 diskless server. Figure 1-4 shows
	the front panel of the CS/2600, which includes a 3.5-inch diskette drive.
	The front panel label shows the model number, providing easy
	identification in mixed environments.

Reset switch

3Com CS/2500

Power Self	Boot	Data	Packet	Network
Test	State	Received	Received	Activity

LED indicators

Figure 1-3 CS/2500 Front Panel