ADTRAN MP-118, MP-114 manual ¾ To download the ini file to your PC, take these 4 steps

Page 18

MP-11x & Microsoft Office Communications Server 2007

Notes:

•Ensure that you download the correct ini file so that your gateway is configured correctly for interoperability with the deployed PBX / PSTN.

• The gateway configuration for the PBX-Sends-Digits option is similar to the One-to-Many option. Therefore, for the PBX-Sends-Digits option, download the ini file for the One-to-Many option.

¾To download the ini file to your PC, take these 4 steps:

1.Open your Web browser, and then in the URL address field, enter the following address:

http://www.audiocodes.com/Content.aspx?voip=2823; the 'Microsoft Office Communications Server 2007 Resource Page' page opens, as shown below:

Figure 3-7: Microsoft Office Communications Server 2007 Resource Page

2

2.Navigate to the 'Verified Telephony Connectivity' table (which contains ini files per tested PBX), by either clicking Verified Telephony Connectivity or scrolling down to the table.

3.In the 'Download' column, click the ZIP file icon corresponding to the required PBX / PSTN protocol; the 'File Download' message box appears.

4.Click the Save button, navigate to the folder on your PC to where you want to download the file, and then click Save; the file is downloaded to the folder and when complete, the 'Download Complete' message box appears.

3.3.1.2Uploading the ini File to the Gateway

Once you have downloaded the correct ini file from the Web, you need to upload it to the gateway's non-volatile memory using the gateway's Embedded Web Server.

¾To upload the ini file to the gateway, take these 6 steps:

1.Unzip the downloaded ZIP file that you downloaded in the previous section. An ini file (with the file extension *.ini) is extracted along with any relevant files.

2.Login to the gateway's Embedded Web Server (refer to Section 3.1.1 on page 10).

3.Open the ‘Configuration File’ screen (Advanced Configuration menu > Configuration File).

Quick Installation Guide

18

Document #: LTRT-26301

Image 18

Contents MediaPack MP-118 & MP-114 Page Table of Contents Readers Notes Customer Support TrademarksWeee EU Directive Abbreviations and TerminologyRelated Documentation Document # Manual NameIntroduction Network Architecture with PBXMP-11x & Microsoft Office Communications Server Required Steps to Install MediaPack Quick Start¾ To access the Embedded Web Server, take these 4 steps Configuring the MediaPackAccessing the Embedded Web Server Embedded Web Server Management ToolNavigating the Embedded Web Server MediaPack Web Interface AreasChanging Login Username and Password ¾ To change the user name and password, take these 3 stepsSearching for ini file Parameters Searched Result ScreenAssigning an IP Address to the MediaPack Assigning an IP Address using BootP¾ To assign an IP address using BootP, take these 3 steps New Client buttonAssigning an IP Address Using CLI via RS-232 Adding a BootP ClientAssigning an IP Address using Http Quick Setup ScreenAdvanced Configuration Using the ini FileObtaining the ini File from the Web ¾ To download the ini file to your PC, take these 4 steps Uploading the ini File to the Gateway¾ To upload the ini file to the gateway, take these 6 steps Configuration File Screen Modifying Parameters Specific to Site DeploymentUsing the Embedded Web Server Defining Mediation Servers IP Address¾ To define Mediation Servers IP address, take these 4 steps ¾ To enable the gateways FXO ports, take these 4 steps Defining Number of FXO Ports Connected to PBXDefining Voice Coders ¾ To define the coder, take these 3 stepsNumber Manipulation Parameters Description Parameter DescriptionDialing Plan Notations Description Example Source IPNumber Normalization Examples 14 Phone Number Manipulation Table for TelÆIP Calls Defining Answer Supervision ¾ To define the Answer Supervision, take these 3 stepsDefining Automatic Dialing ¾ To define Automatic Dialing, take these 4 steps¾ To enable Caller ID, take these 3 steps Enabling Caller IDDefining SIP Transport Type ¾ To define the SIP transport type, take these 3 stepsDefining Disconnect on Broken Connection 19 General Parameters ScreenDefining Dtmf Payload Type ¾ To define the Dtmf payload type, take these 3 steps¾ To enable one-stage dialing, take these 3 steps Enabling One-Stage DialingDefining Channel Select Mode ¾ To define the Channel Select mode, take these 3 steps¾ To disable the Rtcp attribute, take these 5 steps Disabling Rtcp AttributeBacking Up Configuration Settings ¾ To save the ini file on your PC, take these 6 stepsMonitoring the Gateway Front-Panel LEDsMonitoring the Channels ¾ To monitor the status of the channels, take this step¾ To monitor the details of a channel, take these 2 steps Restoring Parameters to Factory Default Settings TroubleshootingGeneral Troubleshooting Debugging using a Syslog Server¾ To configure the Syslog parameters, take these 7 steps Management Settings ScreenRegulatory Information Network Compatibility Telecommunication SafetyIndustry Canada Notice FCC StatementMediaPack MP-118 & MP-114