Setting the System Time
4Enter the IP address of the Syslog server in the appropriate
field.
In our example, 206.253.208.100.
5Click the Submit button.
Setting the System Time
The SOHO stamps each log entry with the time that the event occurred. By default, the SOHO is set to record event times in seconds beginning from the last time the unit was rebooted.
For example, in the image above, the top log entry indicates that the Administrator was allowed access to the unit 26899 seconds since the last power cycle.
The log entry time stamp can be configured to display the time of day by setting the System Time.
Follow these steps to set the System Time:
1With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1.
2From the navigation bar on the left side, select Logging =>
System Time.
The System Time page appears.
User Guide 5.0 | 81 |