Silex technology SX-500-1402 manual Twcffffff, BINARYP1, TEXTP1, TWCFFFFFFP14, TWCFFFFFFP15

Command		Description
	# Service Name	Filter
	1 TWC_FFFFFF	0: No Filter
	2 BINARY_P1	0: No Filter
	3 TEXT_P1	1: Text Substitution m= LF, r= CRLF
	4 TWC_FFFFFF_P1_4	0: No Filter
	5 TWC_FFFFFF_P1_5	0: No Filter
	6 TWC_FFFFFF_P1_AT	4: PostScript Tagged Binary
SET SERVI <service	Sets filter 1 text replacement match string index.
name> FMS	If the index is zero, the default string of <LF> (line feed) is used.
	The default value is 0.
	Format:
	SET SERVI <service name> FRM		nn
SET SERVI <service	Sets filter 1 text replacement replace string index.
name> FRS	If the index is zero, the default string of <CRLF> (carriage return-line feed) is
	used.
	The default value is 0.
	Format:
	SET SERVI <service name> FRS		nn
SET SERVI <service	Enables or disables IP based jobs such as lpd, raw tcp and ftp, on the service
name> IP	The default value is enabled for service 1 and 2, disabled for all others.
	Format:
	SET SERVI <service name> IP		[ENable DIsable]
SET SERVI <service	Changes service name
name> NAme	The default value varies by service
	Format:
	SET SERVI <service name> NAme		<newname>
SET SERVI <service	Sets output port associated with a service
name> POrt	The default value is S1.
	Format:
	SET SERVI <service name> POrt		<portname>
SET SERVI <service	Sets priority for service for multiple service transmissions simultaneously
name> PRIority	The default value is 10.
	Format:
	SET SERVI <service name> PRIority nn
SH SERVI PRI	Shows priority of service.
[service_num]	If service_num is not provided, the priority of all services is listed.
SET SERVI <service	Sets receive only mode for a service
Console Commands	Silex		Page 50
	Part Number 140-00188-210A