![](/images/new-backgrounds/1192624/192624113x1.webp)
Command
Description
name> RECeive | This option is required only for host applications that do not operate properly if |
| data is received from the serial device. |
| The default value is disabled. |
| Sample output: |
| SET SERVI <service name> RECeive [ENable |
| DIsable] |
SET SERVI <service | Sets raw TCP port for service |
name> TCP | If port number is 0, raw TCP is disabled on service. |
| |
| The default value is 9100 for service 1, 3001 for service 2. |
| Format: |
| SET SERVI <service name> TCP nn |
SH SERVI SUMmary | Shows the basic parameters for a specific service. If service_num is not |
[service_num] | provided, parameters for all services are displayed. |
| The command SH SERVI displays the same data as SHOW SERVI SUM. |
|
|
String Commands
| Table 15 String Commands |
|
|
Command | Description |
|
|
|
|
SET STRing | Set service string table entry |
| String 1 to11 cannot be set or changed. |
| Format: |
| SET STRing <string #> ”value” |
CL STRing | Clears the service string table entry |
| Format: |
| CL STRing <string #> |
Console Commands | Silex | Page 51 |
| Part Number |
|