Packard Bell C3 manual M2.5x7 silver

Page 11

4. Open up the LCD lid, release the screws and the LCD cable connector.

Fig. 14 Removing the screws retaining the LCD Cable Connector 5. Carefully lift up the LCD Module.

Packard Bell EasyNote C3 Disassembly Manual

M2.5x7 silver

11

Image 11

Contents Packard Bell EasyNote C3 Disassembly Manual Table of contents Technician Notes Disassembly InstructionsReassembly Instructions OverviewAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage Removing the Memory Module Removing the BatteryRemoving the memory module Removing the Hard Disk DriveRemoving the Keyboard Screws retaining the HDD assemblyDisconnecting the keyboard flat cable Releasing the optical disk drive Removing the Optical Disk DriveRemoving the screws retaining the Heat Plate Removing the LCD ModuleM2.5x7 silver Removing the rubber covers & screws on the LCD Module Removing the LCD PanelRemoving the LCD Panel hinges Removing the CPUUnlocking the CPU Bottom cover screws Removing the Top Cover=M2.5x9 silver =M2.5x7 silver Removing the Main Board Removing the Touch PadM2x4 silver Lifting up carefully the main board Removing the MDC ModemDIP Switch Settings Removing the Speaker AssemblyScrews Dip Switches settingsEasyNote C3 Disassembly Manual