Packard Bell C3 manual =M2.5x9 silver =M2.5x7 silver

Page 16

2. Release all screws on the top cover as shown in Fig. 23

Fig. 23 Top Cover screws

3. Disconnect the Touch Pad Connector as shown in Fig. 24

Fig. 24 Touch Pad connection

4. Carefully lift up the Top Cover.

Packard Bell EasyNote C3 Disassembly Manual

A=M2.5x9 silver

B=M2.5x7 silver

16

Image 16

Contents Packard Bell EasyNote C3 Disassembly Manual Table of contents Disassembly Instructions Reassembly InstructionsOverview Technician NotesHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Removing the Battery Removing the Memory ModuleRemoving the Hard Disk Drive Removing the memory moduleScrews retaining the HDD assembly Removing the KeyboardDisconnecting the keyboard flat cable Removing the Optical Disk Drive Releasing the optical disk driveRemoving the LCD Module Removing the screws retaining the Heat PlateM2.5x7 silver Removing the LCD Panel Removing the rubber covers & screws on the LCD ModuleRemoving the CPU Removing the LCD Panel hingesUnlocking the CPU Removing the Top Cover Bottom cover screws=M2.5x9 silver =M2.5x7 silver Removing the Touch Pad Removing the Main BoardM2x4 silver Removing the MDC Modem Lifting up carefully the main boardRemoving the Speaker Assembly DIP Switch SettingsDip Switches settings ScrewsEasyNote C3 Disassembly Manual