Packard Bell C3 manual M2x4 silver

Page 18

2.Unscrew all screws on the HDD holder as shown in Fig. 27 and separate it carefully from the Main Board.

Fig. 27 Screws on the HDD holder

3.Disconnect Speaker and Lid switch connectors from the Main board and unscrew the screws encircled in Fig. 28

Fig. 28 Screws and connectors on Main Board

M2x4 silver

M2x4 silver

Packard Bell EasyNote C3 Disassembly Manual

18

Image 18

Contents Packard Bell EasyNote C3 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the Battery Removing the Memory ModuleRemoving the Hard Disk Drive Removing the memory moduleScrews retaining the HDD assembly Removing the KeyboardDisconnecting the keyboard flat cable Removing the Optical Disk Drive Releasing the optical disk driveRemoving the LCD Module Removing the screws retaining the Heat PlateM2.5x7 silver Removing the LCD Panel Removing the rubber covers & screws on the LCD ModuleRemoving the CPU Removing the LCD Panel hingesUnlocking the CPU Removing the Top Cover Bottom cover screws=M2.5x9 silver =M2.5x7 silver Removing the Touch Pad Removing the Main BoardM2x4 silver Removing the MDC Modem Lifting up carefully the main boardRemoving the Speaker Assembly DIP Switch SettingsDip Switches settings ScrewsEasyNote C3 Disassembly Manual